
Rotary group – Kayaba PSV2-63T
Quick answer
The Kayaba PSV2-63T rotary group is the rotating assembly inside the main pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates flow and pressure on PSV2 pumps for roughly 13–16 tonne excavators.
Việt Trung Hải supplies genuine and JIC units to the correct code, fitting a standard housing, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Kayaba (KYB) · PSV
- Model code
- PSV2
- Condition
- New, correct code
- Availability
- On request
The Kayaba PSV2-63T rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that produces the pump's flow and pressure.
What the PSV2-63T rotary group fits
PSV2-63T belongs to the Kayaba (KYB) PSV2 main-pump family on roughly 13–16 tonne excavators. With a sealed cylinder block and valve plate, the pump holds pressure and delivers full oil to bucket, arm and travel. Replacing the rotary group lasts longer than swapping a few worn parts.
Signs it needs replacing
Weak, slow lifting, loss of power under load, an unusually hot or noisy pump, and pressure that drops as scored or worn block and valve-plate faces leak internally.
Choosing quality
Việt Trung Hải supplies the PSV2-63T rotary group in genuine and JIC Hydraulics form. The JIC group is manufactured to the code and to the interchange dimensions of a standard Kayaba housing — fit it and run, no lapping or reaming — with material and machining that hold pressure. Call for the correct code and a fast quote.
Frequently asked questions
Which excavators use the PSV2-63T rotary group?
The PSV2-63T belongs to the Kayaba (KYB) PSV2 main-pump family, typically fitted on excavators in the 13–16 tonne class. Send us your pump code and machine model and we'll match the correct rotary group.
Should I replace the whole rotary group or just single parts?
When the cylinder block and valve plate are scored or worn, replacing the complete rotary group holds pressure and runs smoothly for longer. Swapping only a couple of parts often wears out quickly because the remaining parts are already tired.
Does a JIC rotary group fit a standard PSV2 housing?
It does. The PSV2-63T group from JIC Hydraulics is made to the code and to the interchange tolerances of a standard Kayaba pump, so block and valve plate sit at the right clearance as soon as they go in. Việt Trung Hải is an authorized JIC distributor and also stocks genuine units.
Get a quote
Request a quote: Rotary group – Kayaba PSV2-63T
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 63TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 63TPSV2On requestView · get a quoteTechnical handbook