Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Komatsu HPV55

Komatsu · HPV

Rotary group kit – Komatsu HPV55

New, correct codeOn requestHPV55

Quick answer

The Komatsu HPV55 rotary group is the rotating assembly that generates flow and pressure inside the main pump, fitted to ~13-tonne excavators such as the Komatsu PC120.

Việt Trung Hải supplies the HPV55 group from JIC Hydraulics to the correct code, a direct fit in a standard housing, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Komatsu · HPV
Model code
HPV55
Condition
New, correct code
Availability
On request

What the Komatsu HPV55 rotary group fits

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — the part that actually makes the pump's flow and pressure. On the Komatsu HPV55 main pump it feeds the whole hydraulic system of a ~13-tonne excavator, typically the Komatsu PC120.

Signs it needs replacing

Weak digging, slow boom, loss of power under load, an overheating or noisy pump, sagging cylinders, or metal particles in the oil. These usually trace back to a worn or scored valve plate, swash plate or pistons; replacing the whole rotary group restores flow rather than patching single parts.

Quality parts from Việt Trung Hải

As an authorized JIC Hydraulics distributor, VTH supplies the HPV55 rotary group to the correct code, with material, surface finishing and interchange tolerances held to Komatsu dimensions. It assembles into a standard housing with nothing to modify, runs quietly and holds pressure. Komatsu genuine is available as well. Contact us for the right pump version and a fast quote.

Frequently asked questions

Which excavator uses the HPV55 rotary group?

The HPV55 is the main pump on Komatsu's ~13-tonne excavator class, typically the PC120. Its rotary group — cylinder block, pistons, valve plate and swash plate — sets the pump's flow and pressure.

Should I replace the whole rotary group or single parts?

When the valve plate, swash plate and pistons are all worn or scored, replacing the complete rotary group restores flow more reliably and avoids opening the pump twice. Single-part repair only suits localized damage.

Can a JIC HPV55 group go into the housing already on my machine?

It can. Việt Trung Hải distributes the JIC Hydraulics HPV55 group to the correct code, with interchange tolerances and machined faces to Komatsu dimensions, so a sound existing housing takes it straight away. Contact VTH for advice and a fast quote.

Get a quote

Request a quote: Rotary group kit – Komatsu HPV55

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides