Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Komatsu HPV90

Komatsu · HPV

Rotary group kit – Komatsu HPV90

New, correct codeOn requestHPV90

Quick answer

The HPV90 rotary group is the rotating assembly inside the Komatsu HPV main pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that creates flow and pressure on ~20-ton excavators such as the Komatsu PC200.

Việt Trung Hải supplies genuine and JIC HPV90 groups to the correct code, sealing in a standard housing, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Komatsu · HPV
Model code
HPV90
Condition
New, correct code
Availability
On request

What the Komatsu HPV90 rotary group fits

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates flow and pressure. The HPV90 group is the core of the Komatsu HPV main pump used on ~20-ton excavators such as the Komatsu PC200. When the running faces wear, the pump loses output even with a sound housing, so replacing the group restores it without a full pump swap.

Signs of wear

Weak, slow boom and swing that worsen as the oil heats up, whining or vibration, rising oil temperature, scoring on the valve plate and cylinder block, worn piston shoes and metal particles in the oil.

Choosing quality

Mating faces need the right material, tolerances and surface hardness to seal under high pressure. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies the HPV90 group in genuine and JIC form — the JIC unit is made to the code, with interchange tolerances that seal in a standard Komatsu housing. Contact VTH for a fast quote.

Frequently asked questions

Which excavator does the HPV90 rotary group fit?

The HPV90 rotary group is the core of the Komatsu HPV main pump, used on ~20-ton excavators, typically the Komatsu PC200. It is the rotating assembly that generates the pump flow and pressure.

When should I replace the rotary group instead of the whole pump?

When the housing and regulator are still good but the machine is weak, slow when hot and noisy, with scoring on the valve plate and cylinder block, replacing the rotary group restores the pump at lower cost than a full unit.

If the HPV90 housing is still good, can I change just the rotary group?

Yes. With housing and shaft intact, only the rotating assembly needs changing. As an authorized JIC Hydraulics distributor, Việt Trung Hải has the HPV90 group to the correct code and interchange tolerances, sealing in the housing already on the machine; genuine units are stocked too. Contact us for a fast quote.

Get a quote

Request a quote: Rotary group kit – Komatsu HPV90

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides