Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Retainer plate – Kawasaki KVC925

Kawasaki · KVC

Retainer plate – Kawasaki KVC925

New, correct codeOn requestKVC925

Quick answer

The Kawasaki KVC925 port plate is the stationary valve plate against the cylinder block that times and distributes oil between intake and discharge in the KVC main piston pump used on crawler hydraulic excavators.

Việt Trung Hải supplies genuine and JIC plates to code, lapped to seal on the original block, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Kawasaki · KVC
Model code
KVC925
SKU
2021-590-1-83
Condition
New, correct code
Availability
On request

What the Kawasaki KVC925 port plate fits

The port plate (valve plate) is the stationary part pressed against the back of the cylinder block in the Kawasaki KVC925 main piston pump. Its kidney-shaped ports time and distribute oil between the intake and discharge sides as the barrel rotates, while the lapped face seals hydraulically and the ball guide keeps the piston group aligned to the swash plate. This is a KVC-series main pump used on crawler hydraulic excavators.

Signs it needs replacing

A scored, pitted, or grooved plate face causes pressure loss, slow lift, oil heating, and lost power. Arc scoring, heat discoloration, or internal leakage mean it is time to replace the plate, usually alongside a check of the cylinder block and shoes.

Choosing quality

Việt Trung Hải supplies the KVC925 port plate as genuine Kawasaki and as official JIC — we are an authorized JIC Hydraulics distributor. The JIC face is lapped to the original fitting tolerance, so it seals on the cylinder block you already have. Contact us for a fast quote.

Frequently asked questions

Which pump does the KVC925 port plate fit?

The KVC925 port plate is the oil-distributing part inside the Kawasaki KVC-series main piston pump used on crawler hydraulic excavators. When ordering, send us the exact pump code and serial so we match the right plate and any related parts.

When should the port plate be replaced?

Replace it when the face is deeply scored, pitted, heat-discolored, or grooved, causing pressure loss and oil heating. It is best to inspect the cylinder block and piston shoes at the same time so the repair lasts after reassembly.

Does the cylinder block need re-lapping when the KVC925 plate is changed?

Not if the block face is still flat and free of pitting. Our KVC925 plates, genuine or JIC, come lapped to the original fitting tolerance and seal as they are. If the block is deeply scored, dress it first or the new plate will wear just as fast.

Get a quote

Request a quote: Retainer plate – Kawasaki KVC925

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides