
Retainer plate – Komatsu HPV160
Quick answer
The HPV160 ball guide and port plate hold the piston shoes at the correct angle inside the Komatsu HPV160 main pump — an axial-piston pump on roughly 40-tonne excavators like the Komatsu PC400.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the JIC set on the original code and stocks genuine Komatsu parts, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV160
- Condition
- New, correct code
- Availability
- On request
What the HPV160 ball guide & port plate does
The ball guide and port plate steer the piston shoes and hold them at the correct angle throughout the pump's rotation, so the pistons bear evenly against the swash face. This assembly belongs to the Komatsu HPV160 main pump — an axial-piston unit used on roughly 40-tonne excavators such as the Komatsu PC400. Flat, sealing surfaces keep flow and working pressure steady.
When to replace
Scoring, pitting or ridged wear lets the shoes tilt and loosen. You get weak power under load, a slower boom, more noise and vibration, and metal particles in the oil. Any of these means it is time to inspect the ball guide, port plate and shoes together.
Choosing quality
Material, surface hardness and machined flatness decide service life. A slack ball guide tilts the shoes and scores the mating face. The JIC HPV160 ball guide and port plate are cut to the original pump number and go in with nothing to correct; Việt Trung Hải is an authorized JIC Hydraulics distributor and keeps genuine Komatsu on the shelf too. Contact us for a fast quote.
Frequently asked questions
Which excavator does the HPV160 ball guide and port plate fit?
It belongs to the Komatsu HPV160 main pump, an axial-piston pump used on roughly 40-tonne excavators such as the Komatsu PC400. Check your pump code and machine serial to confirm the exact part before ordering.
How do I know the port plate is worn?
Common signs are weak power under load, a slower boom, more noise and vibration, and fast oil heating. Scoring or pitting on the plate face and metal particles in the hydraulic oil mean you should inspect and replace the ball guide, port plate and shoes.
Is the JIC HPV160 ball guide and port plate cut to the original pump code?
Yes. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC HPV160 ball guide and plate are machined to the original code, material and interchange tolerance, so the standard pump takes them without rework. Contact us for a fast quote.
Get a quote
Request a quote: Retainer plate – Komatsu HPV160
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVRear drive shaft – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVFront drive shaft – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV160 (rear)HPV160On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV160 (front)HPV160On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV160HPV160On requestView · get a quoteTechnical handbook