Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Friction plate – Kawasaki DNB50

Kawasaki · DNB

Friction plate – Kawasaki DNB50

New, correct codeOn requestDNB50

Quick answer

The Kawasaki DNB50 valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge in Kawasaki DNB-series pumps. Việt Trung Hải stocks genuine plates and JIC plates cut to the DNB50 code, both lapped flat so they seal on the original block. Fast quote when you send the code.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · DNB
Model code
DNB50
SKU
2021-590-1-99
Condition
New, correct code
Availability
On request

The Kawasaki DNB50 valve plate is the porting plate pressed against the cylinder block inside a piston pump. Its ports time each piston's intake and discharge, so flatness and surface finish set the flow and pressure the pump can build.

Which pump the DNB50 fits

DNB50 is a component in Kawasaki's DNB piston-pump range. It seats between the cylinder block and the valve casing, aligned with the oil ports that feed each piston stroke. Send your pump number and photos of the old part so we match the exact code, since plates vary within a series.

Signs it needs replacing

Scoring, pitting or scorch marks on the contact face, pressure loss under load, oil overheating, or rising internal leakage. Deep scoring opens the oil gap and speeds up cylinder-block wear.

Genuine-quality parts

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC valve plates for the DNB50: wear-resistant material, lapped flat to the DNB50 spec, so the face seals against the original cylinder block as it comes and no bench lapping is needed. Genuine Kawasaki plates are stocked too. Send the code for a fast quote.

Frequently asked questions

Which pump does the DNB50 valve plate fit?

DNB50 is a valve plate for Kawasaki DNB-series piston pumps, seated between the cylinder block and valve casing to distribute oil to each piston stroke. Send your pump number and photos of the old part so we confirm the exact code.

How do I know the valve plate needs replacing?

Check the contact face for deep scoring, pitting or scorch marks. If the pump is weak under load, loses pressure, overheats oil or leaks internally, replace the valve plate and inspect the cylinder block at the same time.

Does a JIC DNB50 valve plate need lapping before it goes in?

No. JIC laps and polishes the plate to the DNB50 spec, so it seals against the original cylinder block straight out of the box. Việt Trung Hải is an authorized JIC Hydraulics distributor and also carries genuine Kawasaki plates. Send the code for a fast quote and advice on matching parts for your pump.

Get a quote

Request a quote: Friction plate – Kawasaki DNB50

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides