Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki K3V112DT

Kawasaki · K3V

Valve plate – Kawasaki K3V112DT

New, correct codeOn requestK3V112DT

Quick answer

The Kawasaki K3V112DT valve plate is the high/low-pressure porting plate inside the K3V112DT main pump, fitted to ~20-ton excavators such as the Komatsu PC200, Kobelco SK200, Hitachi ZX200 and Doosan DX225. Việt Trung Hải supplies Kawasaki genuine and JIC Hydraulics plates cut to the same code and porting, so they seal on the original block. Fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · K3V
Model code
K3V112DT
SKU
2021-590-1-133
Condition
New, correct code
Availability
On request

Kawasaki K3V112DT valve plate: which pump and machine

The valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge. On the Kawasaki K3V112DT main pump, it fits the piston pump assembly used on ~20-ton excavators like the Komatsu PC200, Kobelco SK200, Hitachi ZX200 and Doosan DX225. The working face is ground flat to hold a stable oil film against the block.

When to replace

As the plate wears, the machine loses digging power, slows under load, and the oil runs hot. Deep scoring, wear grooves, pitting around the oil ports, or a flaked alloy layer point to internal leakage. The plate and block wear as a pair, so inspect both.

Choosing quality

Match the exact K3V112DT port profile. Việt Trung Hải supplies Kawasaki genuine plates and JIC Hydraulics plates — same code, same porting, each sealing on the original block with the timing as designed and nothing to rework. Fast quote.

Frequently asked questions

Which excavators use the K3V112DT valve plate?

It belongs to the Kawasaki K3V112DT main pump, used on roughly 20-ton excavators such as the Komatsu PC200, Kobelco SK200, Hitachi ZX200 and Doosan DX225. Send your pump code or machine model and Việt Trung Hải will confirm the exact part before quoting.

How do I know the valve plate needs replacing?

Common signs are weak digging force, slow response under load, and oil heating up quickly. On teardown, deep scoring, wear grooves, or pitting at the oil ports means it should be replaced; the plate and cylinder block usually wear together.

Does a JIC K3V112DT plate match the pump's port profile?

It does. JIC cuts the plate to the K3V112DT code with the ports and sealing face held to the drawing, so it seats on the original block with the porting timed correctly. Việt Trung Hải also carries genuine Kawasaki plates. Contact us for a fast quote and help confirming the right part.

Get a quote

Request a quote: Valve plate – Kawasaki K3V112DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides