Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki K3V280DT

Kawasaki · K3V

Valve plate – Kawasaki K3V280DT

New, correct codeOn requestK3V280DT

Quick answer

The Kawasaki K3V280DT valve plate times each piston's intake and discharge in the K3V280 main piston pump, used on large ~50-tonne-and-up excavators such as the Kobelco SK480/SK500 or Doosan DX500.

Việt Trung Hải supplies the correct-code JIC plate, precision-lapped to seal in the original pump, with technical advice and a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · K3V
Model code
K3V280DT
SKU
2021-590-1-136
Condition
New, correct code
Availability
On request

The Kawasaki K3V280DT valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge in the main pump. Its flatness and surface finish directly control the flow and pressure the pump delivers.

Which pump and machine

It belongs to the Kawasaki K3V280 main piston pump, a large unit fitted to roughly 50-tonne-and-up crawler excavators such as the Kobelco SK480/SK500 and Doosan DX500. The correct K3V280DT part matches the kidney ports and profile of the block and control valve.

Signs of wear

Scoring, pitting or warping lets oil leak internally, so the pump loses pressure, digging and lifting go weak, and response slows. Abnormally hot oil and metal particles point to a worn plate and block.

Quality parts

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC K3V280DT valve plates: hardened alloy steel, precision-lapped to the flatness the code calls for, so the plate seals in the original pump and holds up under heavy load with no re-lapping. Genuine plates are stocked too. Contact VTH for correct-code advice and a fast quote.

Frequently asked questions

Which excavators use the K3V280DT valve plate?

It belongs to the Kawasaki K3V280 main piston pump, fitted to large crawler excavators of roughly 50 tonnes and up, such as the Kobelco SK480/SK500 and Doosan DX500. Confirm your exact pump code before ordering.

When should the valve plate be replaced?

If the pump loses pressure, digging and lifting go weak, movements slow, oil runs hot or shows metal particles, the plate is likely scored, pitted or warped. Replace it and inspect the cylinder block and pistons to prevent further damage.

Will a JIC K3V280DT plate seal straight away in an old pump?

It will. The JIC plate is made to the K3V280DT code from hardened alloy steel and precision-lapped to the flatness the code calls for, so it seals against the original block with no further work. Việt Trung Hải also carries genuine plates. Contact VTH for a fast quote.

Get a quote

Request a quote: Valve plate – Kawasaki K3V280DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides