Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki K5V200DT

Kawasaki · K5V

Valve plate – Kawasaki K5V200DT

New, correct codeOn requestK5V200DT

Quick answer

The Kawasaki K5V200DT valve plate is the high/low-pressure porting plate inside the K5V main pump, used on ~35–45 tonne excavators such as the Kobelco SK350 and Hitachi ZX350.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC K5V200DT plates to code, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · K5V
Model code
K5V200DT
SKU
2021-590-1-140
Condition
New, correct code
Availability
On request

The K5V200DT valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge inside the pump. It belongs to Kawasaki's K5V main-pump family, the large pump group used on ~35–45 tonne excavators such as the Kobelco SK350 and Hitachi ZX350.

Signs it needs replacing

A worn or scored valve plate lets high-pressure oil bleed across to the low-pressure side, so the pump loses flow. The machine feels weak and slow to respond, worse once the oil is hot, and oil temperature climbs. Look for heat discolouration, pitting or metal particles in the oil.

Choosing quality

A good valve plate needs the right steel, proper hardening, a lapped-flat sealing face and a wear-resistant coating. As an authorized JIC Hydraulics distributor, Việt Trung Hải draws K5V200DT plates straight from JIC — correct code, correct locating hole and port orientation, so they go into the standard pump as they are. Genuine Kawasaki plates are stocked as well. Call us for a fast quote.

Frequently asked questions

Which excavator does the K5V200DT valve plate fit?

The K5V200DT valve plate sits in the Kawasaki K5V main pump, the large pump group for roughly 35–45 tonne excavators such as the Kobelco SK350 and Hitachi ZX350. Always check the exact pump code on your machine before ordering.

How do I know the valve plate is worn?

Typical signs are a weak pump, slow response that worsens as the oil heats up, and rising oil temperature. On teardown, a scored, heat-discoloured or pitted sealing face and metal particles in the oil mean it should be replaced.

Does Việt Trung Hải stock the K5V200DT valve plate?

Yes. As an authorized JIC Hydraulics distributor, we keep K5V200DT plates from JIC to the correct code, alongside genuine Kawasaki ones. Send the pump code and serial number and our technical team will match the version and quote fast.

Get a quote

Request a quote: Valve plate – Kawasaki K5V200DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides