Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki K5V80DT

Kawasaki · K5V

Valve plate – Kawasaki K5V80DT

New, correct codeOn requestK5V80DT

Quick answer

The Kawasaki K5V80DT valve plate is the porting plate against the cylinder block that times each piston's intake and discharge on the main pump of ~13–14 tonne excavators.

Việt Trung Hải is an authorized JIC Hydraulics distributor and supplies the K5V80DT to code, along with genuine Kawasaki plates, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · K5V
Model code
K5V80DT
SKU
2021-590-1-141
Condition
New, correct code
Availability
On request

What the K5V80DT valve plate does

The valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge. On the Kawasaki K5V80DT main pump — an axial-piston unit powering excavators in the ~13–14 tonne class — it works under high pressure differential and high sliding speed right at the block interface. Correct code and correct port (kidney) profile keep flow and pressure where they should be.

Signs of wear

A worn valve plate shows up as gradual power loss, slow boom or arm under load, hydraulic oil heating faster than usual, and metal particles in the oil. On teardown the sealing face is usually scored, cavitation-pitted at the port edges, or no longer flat, letting oil leak internally from high to low pressure.

Choosing quality

Flatness, surface hardness and wear resistance are what matter. Việt Trung Hải is an authorized JIC Hydraulics distributor, so K5V80DT plates come straight from JIC: correct code, correct fit, seating on the original block with no reworking. Genuine Kawasaki plates are available too, and the quote comes back fast.

Frequently asked questions

Which excavators use the K5V80DT valve plate?

The K5V80DT is the main axial-piston pump for excavators around the 13–14 tonne class. The valve plate must match this pump family. Send your pump code and machine model so Việt Trung Hải can confirm the correct port profile before quoting.

How do I know the valve plate is worn?

Common signs are gradual power loss, slow boom and arm under load, oil heating quickly, and metal particles in the oil. On teardown, a scored, cavitation-pitted or no-longer-flat sealing face means it should be replaced to stop internal leakage.

Where do JIC K5V80DT valve plates come from?

Straight from JIC Hydraulics — Việt Trung Hải is an authorized distributor. Every plate carries the K5V80DT code and is machined to fit, so it goes into the original pump housing as it is. Genuine Kawasaki plates are on the shelf as well.

Get a quote

Request a quote: Valve plate – Kawasaki K5V80DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides