Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki K7V63DT

Kawasaki · K7V

Valve plate – Kawasaki K7V63DT

New, correct codeOn requestK7V63DT

Quick answer

The K7V63DT valve plate is the high/low-pressure porting plate for Kawasaki K7V main pumps on ~13-14 tonne excavators, timing each piston's intake and discharge.

Việt Trung Hải supplies the exact part — genuine Kawasaki and JIC plates taken directly from JIC Hydraulics — with a fast quote when you send your pump code.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · K7V
Model code
K7V63DT
SKU
2021-590-1-142
Condition
New, correct code
Availability
On request

What the Kawasaki K7V63DT valve plate does

The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. The K7V63DT belongs to Kawasaki's K7V main piston pump family, fitted to crawler excavators in the ~13-14 tonne class. It carries full working pressure while sliding against the block, so its flatness and finish drive pump flow.

When to replace

A worn, scored or pitted plate lets oil bleed from the high- to low-pressure side: weak pump, lost pressure, slow lift or swing. Dull grey wear, circular scoring or blue heat marks all are reason enough to fit a new plate, and the block and pistons usually need checking too.

Choosing quality

Việt Trung Hải supplies the exact K7V63DT valve plate — genuine Kawasaki and JIC Hydraulics. We are an authorized JIC distributor taking stock directly from the maker; the porting profile and flatness are cut to the drawing, so the plate beds onto the standard cylinder block first time. Send your pump code for a fast quote.

Frequently asked questions

Which excavator does the K7V63DT valve plate fit?

It fits Kawasaki K7V main pumps used on crawler excavators around 13-14 tonnes. Send your pump code or machine number so we can confirm the correct version and orientation before quoting.

How do I know the valve plate is worn?

Weak pump, lost pressure, slow lifting or swing are common signs. On teardown, circular scoring, pitting, dull grey wear or blue heat marks mean it should be replaced; check the cylinder block and pistons as well.

What do you need from me to quote a K7V63DT plate?

The K7V63DT code stamped on the pump housing and a photo of the old plate, so we can match the porting profile. Việt Trung Hải is an authorized JIC Hydraulics distributor and carries JIC and genuine Kawasaki plates to code, with a fast quote once it is matched.

Get a quote

Request a quote: Valve plate – Kawasaki K7V63DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides