Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki NV137DT

Kawasaki · NV

Valve plate – Kawasaki NV137DT

New, correct codeOn requestNV137DT

Quick answer

The Kawasaki NV137DT valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge in Kawasaki's NV-series axial-piston units on excavators.

Việt Trung Hải supplies the correct code, both genuine and JIC parts through authorized distribution, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · NV
Model code
NV137DT
SKU
2021-590-1-153
Condition
New, correct code
Availability
On request

What the Kawasaki NV137DT valve plate does

The NV137DT valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge. It belongs to Kawasaki's NV series of axial-piston units used in excavator hydraulic systems. Because the face runs under high pressure and constant sliding contact, its flatness and finish govern flow and the life of the whole unit.

Signs it needs replacing

Scoring, pitting or wear at the kidney ports lets oil leak internally: the machine grows weak, cylinders slow, oil overheats and pressure drops under load. Heat discoloration and circular scratch marks mean the plate — and its mating cylinder block — should be renewed together.

Choosing quality

A valve plate needs hardened, precision-ground and lapped steel to seal at high pressure. Việt Trung Hải supplies the correct-code Kawasaki NV137DT as a genuine part and as a JIC Hydraulics part through our authorized distribution — same code, same fit, seating evenly in the standard piston group. Contact us for a fast quote.

Frequently asked questions

Which pump or motor does the NV137DT valve plate fit?

The NV137DT belongs to Kawasaki's NV-series axial-piston units used in excavator hydraulics. Send us your pump or motor code, serial number and a photo of the old part so Việt Trung Hải can confirm the exact fit before quoting.

When should the valve plate be replaced?

If the machine is weak, cylinders slow, oil overheats and pressure drops under load, the plate is usually scored, pitted or heat-discolored. Replace it together with the mating cylinder block to restore proper sealing.

The pump is still weak after a new NV137DT plate — why?

Usually the rest of the rotary group: a pitted block face, worn piston heads or shoes still let oil past even with a fresh plate. Check the regulator before you conclude. Việt Trung Hải carries every part of the NV137DT group, genuine and JIC, to the correct code.

Get a quote

Request a quote: Valve plate – Kawasaki NV137DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides