Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki NVK45DT

Kawasaki · NV

Valve plate – Kawasaki NVK45DT

New, correct codeOn requestNVK45DT

Quick answer

The Kawasaki NVK45DT valve plate is the porting plate against the cylinder block that times each piston's intake and discharge in the Kawasaki NV-series (NVK45) main pump.

Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks NVK45DT plates cut to code that go straight into a standard pump, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · NV
Model code
NVK45DT
SKU
2021-590-1-158
Condition
New, correct code
Availability
On request

The Kawasaki NVK45DT valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge in the pump. It runs under constant friction and pressure differential, so the sealing face must stay flat and smooth.

What the NVK45DT fits

This part serves the Kawasaki NVK45 main pump in the NV-series axial piston family. The NVK45DT code matches the port geometry and block centerline, so match the exact code and installation orientation when replacing it.

When to replace it

A worn valve plate shows up as slow pressure build-up, weak performance under load, and oil heating from internal leakage. On teardown you often see deep scoring, oil-run grooves, discoloration or burn marks, and coating flaking.

Genuine-quality parts

Việt Trung Hải is an authorized JIC Hydraulics distributor. JIC cuts the NVK45DT plate to the correct port profile, thickness and interchange tolerance, so it beds against the block of a standard NVK45 pump with no fitting work on the bench. NVK45DT in stock, fast quote.

Frequently asked questions

Which pump does the NVK45DT valve plate fit?

It fits the Kawasaki NVK45 axial piston main pump in the NV series. When ordering, send your pump code and a photo of the old valve plate so we match the exact port geometry and installation orientation and avoid a wrong fit.

How do I know the valve plate is worn?

Common signs are slow pressure build-up, weak performance under load, and oil that heats quickly from internal leakage. On teardown, deep scoring, grooves, discoloration or burn marks on the face mean it should be replaced before damage spreads to the block and pistons.

How do I pick the right valve plate code for an NVK45 pump?

Read the code on the pump housing and the number cast into the old plate, then check the port profile and fitting direction so intake and discharge line up. Send Việt Trung Hải the pump code and we will confirm it and quote the JIC NVK45DT plate quickly.

Get a quote

Request a quote: Valve plate – Kawasaki NVK45DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides