Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Kawasaki MX750

Kawasaki · MX

Cylinder block – Kawasaki MX750

New, correct codeOn requestMX750

Quick answer

The Kawasaki MX750 cylinder block is the barrel holding the piston bores in the rotating group of a Kawasaki MX-series piston hydraulic motor, governing volumetric efficiency and output power.

Việt Trung Hải supplies genuine and JIC MX750 blocks to the same code, fitting the original housing at the correct clearance, and quotes fast.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Kawasaki · MX
Model code
MX750
SKU
2021-590-1-258
Condition
New, correct code
Availability
On request

What the Kawasaki MX750 cylinder block fits

The cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to move oil. The MX750 code belongs to Kawasaki's MX-series axial-piston hydraulic motor; the block sits in the rotating group with the pistons, valve plate and shaft, and carries the highest load and wear in the unit.

Signs it needs replacing

Scoring or pitting on the running face, worn piston bores that leak internally so pressure won't build, sluggish or weak operation, unusual oil heat, noise or vibration under load, and copper particles in the oil.

Choosing quality parts

A good block needs sound alloy steel, correct heat treatment and precise bore and face machining to hold tight clearances. JIC Hydraulics cuts the MX750 block to the same code and fitting tolerance, so clearances come back to as-new once it is in the original motor housing. Việt Trung Hải distributes JIC under authorization and carries genuine blocks as well — send the code MX750 for a fast quote.

Frequently asked questions

Which unit does the MX750 cylinder block fit?

MX750 is a cylinder block for Kawasaki's MX-series axial-piston hydraulic motor. It sits in the rotating group and takes high load and wear. Send the code and your motor details so Việt Trung Hải can confirm the right part and quote.

When should the cylinder block be replaced?

Replace it when the running face is scored or pitted, piston bores are worn and leak internally, the machine is weak or slow, the oil overheats, or copper particles appear in the oil. Inspect the pistons and valve plate together for a matched repair.

Does the JIC MX750 block hold as-new clearances?

Yes. JIC machines the MX750 block to the same code, with hardened alloy steel and bores and face at fitting tolerance, so the working clearance comes back to what it was on a new unit. Việt Trung Hải distributes JIC Hydraulics under authorization and carries genuine blocks too, quoting fast by code.

Get a quote

Request a quote: Cylinder block – Kawasaki MX750

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides