
Cylinder block – Komatsu HPV132
Quick answer
The Komatsu HPV132 cylinder block is the barrel holding the piston bores that rotate around the drive shaft, used in HPV-series main pumps on PC300-class 30-tonne excavators.
Việt Trung Hải, an authorized JIC Hydraulics distributor, has the Komatsu genuine block and the JIC block, both to the exact HPV132 code, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV132
- Condition
- New, correct code
- Availability
- On request
Cylinder block for the Komatsu HPV132 pump
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate to draw and deliver oil, setting the flow and pressure the pump builds. Part HPV132 fits Komatsu HPV-series main pumps, commonly on the PC300-class 30-tonne excavator.
Signs it needs replacing
A scored valve-plate face or worn piston bores let oil slip past, so the pump stops building pressure. The machine weakens, slows and lags once the oil warms, with weak boom and arm, unusual noise, and metal particles in the oil.
Choosing the right part
Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC HPV132 block is official JIC stock, cut to interchange tolerance with a hardened running face, so it holds its seal under load and goes into the original pump housing untouched. Komatsu genuine blocks sit on the same shelf, both to the exact HPV132 code, with fast quotes for repair and overhaul shops.
Frequently asked questions
Which excavator does the HPV132 block fit?
The HPV132 fits Komatsu HPV-series main pumps, commonly on PC300-class excavators around 30 tonnes. Send your machine model and pump code so Việt Trung Hải can confirm the exact part before quoting.
How do I know the cylinder block is worn?
If the pump will not build pressure, the machine is weak and sluggish when the oil is hot, or you find unusual noise and metal particles in the oil, the block face and piston bores are likely worn. Inspect the block with the valve plate and pistons.
Does the pump need re-setting after an HPV132 block change?
The JIC block is made to the HPV132 code, so thickness, splines and clearances match the original shaft and valve plate — no honing, no lapping. Once it is together you only bleed the pump and check cut-off pressure and flow against the machine's spec. Việt Trung Hải, an authorized JIC Hydraulics distributor, quotes fast.
Get a quote
Request a quote: Cylinder block – Komatsu HPV132
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVBall guide – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV160HPV160On requestView · get a quoteTechnical handbook