Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Komatsu HPV140

Komatsu · HPV

Cylinder block – Komatsu HPV140

New, correct codeOn requestHPV140

Quick answer

The Komatsu HPV140 cylinder block is the rotating barrel holding the piston bores of the HPV140 main pump, fitted to ~40-tonne excavators such as the Komatsu PC400.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the block from the pump maker and from JIC, both to code and on interchange tolerance, with a fast quote once you send your pump code.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Komatsu · HPV
Model code
HPV140
Condition
New, correct code
Availability
On request

The HPV140 cylinder block is the rotating barrel holding the piston bores; pistons reciprocate inside them to draw and deliver hydraulic oil. It is the most heavily loaded part of the main pump.

Which pump and machine it fits

HPV140 is a main piston pump in the Komatsu HPV family, fitted to ~40-tonne excavators such as the Komatsu PC400. The block's valve-plate face and piston bores must match the pump group exactly.

When to replace

Weak, slow lifting under heavy load, fast oil heating, unusual pump noise, and a scored, pitted or heat-discoloured valve-plate face all signal a worn block leaking internally.

Choosing quality parts

As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies the HPV140 block from the pump maker and from JIC. The JIC block is built by JIC Hydraulics to the HPV140 code: heat-treated alloy steel, precision bores and a lapped face, on interchange tolerance with the original shaft and valve plate, so clearance lands where it should. Send your pump code for a fast quote.

Frequently asked questions

Which excavator does the HPV140 cylinder block fit?

The HPV140 is a main piston pump in the Komatsu HPV family used on roughly 40-tonne excavators, typically the Komatsu PC400. Send your pump code and machine model so we can confirm the correct bore size and valve-plate face before quoting.

When should the HPV140 cylinder block be replaced?

When the machine is weak or slow under heavy load, oil heats up quickly, or the pump grows noisy. On inspection you typically find a scored or pitted valve-plate face, or worn piston bores that raise clearance and cause internal leakage and pressure loss.

The HPV140 is weak — is a new block enough, or does the whole group need doing?

Look at the block face and the valve plate first. If the valve plate is still flat and the piston shoes have no play, a new block brings the pressure back. If the wear has spread to the valve plate or the swash bearing, do the whole rotating group. Việt Trung Hải carries the HPV140 block and the other rotating-group parts from JIC Hydraulics, all to code.

Get a quote

Request a quote: Cylinder block – Komatsu HPV140

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides