
Cylinder block – Rexroth A10VO28
Quick answer
The Rexroth-Uchida A10VO28 cylinder block is the rotating barrel of piston bores at the heart of this small piston pump, used on mini excavators.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC blocks on the correct code, sealing against the original valve plate, with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Uchida/Rexroth · A10V
- Model code
- A10VO28
- Condition
- New, correct code
- Availability
- On request
What the A10VO28 cylinder block fits
The cylinder block is the rotating barrel that holds the piston bores; each piston reciprocates in its bore to draw and discharge oil. It sits at the heart of the Rexroth-Uchida A10VO28 piston pump, a small main pump used on mini excavators and mobile hydraulic systems. The block face runs against the valve plate, so flatness and surface hardness govern how well the pump holds pressure.
When to replace it
Scoring, pitting or wear on the block face or piston bores widens clearances and lets oil leak internally. The pump weakens, the machine slows, oil overheats and pressure is hard to build under load. Metal particles in the oil signal the block and pistons are worn.
Choosing the right part
Match the A10VO28 code, hardened steel, precise bores and a lapped mating face. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies genuine and JIC blocks — same code, same tolerances, sealing against the original valve plate. Fast quotes on your pump code.
Frequently asked questions
Which machines use the A10VO28 block?
The A10VO28 is a small Rexroth-Uchida piston pump found on mini excavators and mobile hydraulic systems. The cylinder block sits inside this pump; quote the A10VO28 code so we match the correct block for your unit.
How do I know the cylinder block is worn?
A scored or pitted block face and worn piston bores cause weak flow, slow operation, overheating and low pressure under load. Metal particles in the hydraulic oil are a strong sign the block and pistons need replacing.
Does a JIC A10VO28 block need any fitting work?
No. The JIC block is made to the A10VO28 code, with bores and running face on the same tolerances, so it goes into the old rotating group as it is. Việt Trung Hải also has genuine blocks — send your pump code and machine details for a stock check and a fast quote.
Get a quote
Request a quote: Cylinder block – Rexroth A10VO28
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A10VRotary group kit – Rexroth A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VSwash plate – Rexroth-Uchida A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VRetainer plate – Rexroth-Uchida A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VValve plate – Rexroth A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VPin – Rexroth-Uchida A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VPiston – Rexroth A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VBall guide – Rexroth-Uchida A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V40A10V40On requestView · get a quoteTechnical handbook