Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Rexroth A7VO250

Uchida/Rexroth · A7VO

Cylinder block – Rexroth A7VO250

New, correct codeOn requestA7VO250

Quick answer

The A7VO250 cylinder block holds the piston bores rotating around the drive shaft and sets the flow and pressure of the large Rexroth-Uchida A7VO bent-axis variable pump.

Việt Trung Hải supplies A7VO250 blocks, genuine or JIC, machined to the exact code so the pump holds pressure again, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Uchida/Rexroth · A7VO
Model code
A7VO250
Condition
New, correct code
Availability
On request

What the A7VO250 cylinder block does

The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate inside these bores to draw and push oil, setting the pump's flow and pressure.

The A7VO250 belongs to Rexroth-Uchida's large bent-axis variable piston pump family, used on heavy machinery and industrial hydraulic drives. This block must match the A7VO250 pump specifically and should not be swapped with blocks from other series.

Wear signs and sourcing

Watch for a scored or pitted valve-plate face and widened piston bores, which show up as weak flow, sluggish machine response, lost power under load, fast oil heating and metal fines in the oil. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies A7VO250 blocks in genuine and JIC — machined to the A7VO250 code and bore tolerance, so the bent-axis rotating group goes back together without rework. Fast quotes.

Frequently asked questions

Which pump does the A7VO250 cylinder block fit?

It fits the large Rexroth-Uchida A7VO250 bent-axis variable piston pump used on heavy machinery and industrial hydraulic drives. It is the correct match for the A7VO250 pump and should not be swapped with blocks from other series.

When should the cylinder block be replaced?

Replace it when the valve-plate face is scored or pitted and the piston bores widen, causing weak flow, sluggish response, power loss under load, fast oil heating and metal fines. Change the block together with its piston set.

What do you need to quote an A7VO250 block?

Send the full pump code, the serial number and a photo of the old block face. Việt Trung Hải confirms the exact A7VO250 variant, tells you what is on the shelf in genuine and JIC, and quotes fast, including advice on checking the piston set.

Get a quote

Request a quote: Cylinder block – Rexroth A7VO250

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides