Maintenance & uptimeHow to Change Hydraulic Oil on an Excavator: 7 Clean Steps
The excavator hydraulic oil-change procedure: drain clean, replace the filter, top up with the right grade, and bleed to avoid contamination and trapped air.
Technical handbook
Technical know-how and hands-on experience with hydraulic pumps, rotary groups, seals and filters — and how to choose the right part by machine line and model year. Written by the Việt Trung Hải technical team.
129 articles · Page 3/11
Maintenance & uptimeThe excavator hydraulic oil-change procedure: drain clean, replace the filter, top up with the right grade, and bleed to avoid contamination and trapped air.
Understanding machines & systemsTracks spread the load for low ground pressure and stability on soft ground; wheels self-travel fast on roads for urban and utility work. Compare the six differences and choose by ground and travel rhythm.
Choosing the right partA repair technician guide to choosing the right hydraulic hose by mount location, fitting, ply count, and oil type.
Understanding machines & systemsHow the excavator cooling pack is built and how to keep cores, fan and thermostat in shape so the machine stays cool.
Hydraulics & pumpsA hydraulic check valve holds a load by blocking reverse oil flow. Learn the 5 failure signs, how to test by isolation and engine-off drift, and how to tell valve drift from a cylinder-seal leak.
Understanding machines & systemsAn overview of excavator structure across the upper, lower, and working blocks and how they fit together.
Market, pricing & sourcingA travel-motor bill is the sum of five line items: rotary group, gears, bearings, brake and seals. The right diagnosis decides whether you are at the reseal, partial, rebuild or replacement tier.
Hydraulics & pumpsHow swing and travel hydraulic motors turn oil pressure and flow into torque, plus the basic construction and wear signs that let you read trouble early.
Maintenance & uptimeHow to spot a dirty excavator air filter, clean it correctly, and know when to replace the element instead of blowing it out.
Hydraulics & pumpsThe qualitative principle of pump flow testing to tell a truly worn pump apart from a leaking valve, starved suction, or thin oil, without fixed numbers.
Hydraulics & pumpsA mini excavator pump group is a variable-displacement piston pump plus a gear pump for pilot and charge. Four things must match when replacing: displacement, flange and shaft, control type, and rotation.
Diagnosis & repairHow to separate the three causes of excavator boom drift: a worn cylinder seal, a leaking load-holding valve, or a worn spool.