Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Komatsu HPV35

Komatsu · HPV

Rotary group kit – Komatsu HPV35

New, correct codeOn requestHPV35

Quick answer

The Komatsu HPV35 rotary group is the rotating assembly that generates flow and pressure inside the HPV main piston pump, fitted on smaller Komatsu excavators.

Việt Trung Hải supplies Komatsu genuine and JIC Hydraulics units to the correct code, a direct fit in a standard housing, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Komatsu · HPV
Model code
HPV35
Condition
New, correct code
Availability
On request

Komatsu HPV35 rotary group — what it fits

The HPV35 rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that produces the main pump's flow and pressure. It fits Komatsu HPV-series piston pumps used on smaller Komatsu excavators.

When to replace

Slow lifting and swing when the oil is hot, a whining or hot-running pump, and a general loss of power point to worn sliding faces: scored cylinder block and valve plate, a grooved swash plate, loose pistons leaking flow back to tank. Replacing the complete group restores output instead of patching single parts.

Choosing quality parts

Rotary groups carry heavy load, so material and machining decide their life. Việt Trung Hải supplies the HPV35 group in Komatsu genuine and JIC Hydraulics form — the JIC unit is hardened to spec and its sliding faces ground to the interchange tolerances of the code, a direct fit in a standard housing. Call us for the correct pump variant and a fast quote.

Frequently asked questions

Which excavator does the HPV35 rotary group fit?

It fits Komatsu HPV-series piston pumps used on smaller Komatsu excavators. Send us your pump serial number or machine model and Việt Trung Hải will confirm the exact configuration and quote quickly.

Should I replace the whole rotary group or just the pistons?

When the cylinder block, valve plate and swash plate are worn together, a complete rotary group restores clearances evenly and holds pressure longer. Replacing single parts often only helps briefly before pressure drops again.

Does the JIC HPV35 group match the original piston count and valve-plate profile?

It does. The JIC Hydraulics group follows the HPV35 code — piston count, block size and valve-plate profile as drawn — with interchange tolerances that make it a tight fit in a standard housing. Việt Trung Hải also carries Komatsu genuine units and advises by pump variant.

Get a quote

Request a quote: Rotary group kit – Komatsu HPV35

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides