Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Shoe plate – Komatsu HPV35 (front)

Komatsu · HPV

Shoe plate – Komatsu HPV35 (front)

New, correct codeOn requestHPV35

Quick answer

The HPV35 front shoe plate holds the piston shoes flat against the swash plate in the front section of Komatsu's tandem HPV35 main pump (compact excavators), keeping them seated and evenly loaded.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Shoe plate
Brand / pump line
Komatsu · HPV
Model code
HPV35
Condition
New, correct code
Availability
On request

What the HPV35 front shoe plate is

The front shoe plate is the retainer for the front pump section of Komatsu's tandem HPV35 main pump. As the cylinder block turns, it presses the piston shoes flat against the swash plate, keeping each shoe seated and evenly loaded throughout the stroke. HPV35 is a compact main pump fitted to small Komatsu crawler excavators. This part holds the shoes — unlike the swash plate, and it does not set displacement.

Signs of trouble

A worn, cracked or slack plate lets the shoes tilt, lift off the swash plate and lose the oil-film seal. The machine turns weak, slow to lift or slew, loses power under load, heats the oil fast and runs with vibration and noise. Replace early to spare the shoes and swash plate.

Choosing the right part

The plate needs the right material, hardness, a flat face and even hold-down to resist wear over time. As an authorized JIC Hydraulics distributor, Việt Trung Hải ships the JIC HPV35 front plate to the exact code and to interchange tolerances — old one out, new one in, run it; genuine Komatsu remains on the shelf. Fast quote.

Frequently asked questions

Where is the HPV35 front shoe plate?

In the front section of the tandem HPV35 main pump, holding that section's piston shoes against the swash plate.

What does a failed HPV35 front shoe plate cause?

Lifting shoes, internal leakage, a weak pump, slow lift and slew, hot oil, vibration and noise.

Will the HPV35 front plate fit the original pump housing?

It will. JIC machines it to the interchange tolerances of the front code, so it goes into the existing housing untouched.

Get a quote

Request a quote: Shoe plate – Komatsu HPV35 (front)

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides