Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Komatsu HPV75

Komatsu · HPV

Rotary group kit – Komatsu HPV75

New, correct codeOn requestHPV75

Quick answer

The Komatsu HPV75 rotary group is the rotating assembly — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates flow and pressure inside the main piston pump of a mid-size Komatsu excavator.

Việt Trung Hải supplies the HPV75 group in genuine and JIC form, to the correct code and bedding straight into a standard housing, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Komatsu · HPV
Model code
HPV75
Condition
New, correct code
Availability
On request

What the HPV75 rotary group fits

The Komatsu HPV75 rotary group is the rotating core of a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — the assembly that actually produces the pump's flow and pressure. HPV75 belongs to Komatsu's HPV piston-pump family, sitting in the mid-size class between the HPV55 (~13t machines) and the HPV90/95 used on the PC200 (~20t).

When to replace

A weak pump, slow bucket and arm under load, and fast oil heating point to internal leakage from wear. A scored valve plate and swash plate, loose piston-to-block clearance, whining noise or metal in the oil all mean the group is due.

Choosing quality

Flatness, hardness and correct clearances hold pressure over time. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the HPV75 group in genuine and JIC form — JIC machines the shoe plate and valve plate to the flatness the code calls for, so the group beds correctly in a standard housing. Fast quote.

Frequently asked questions

Which excavator does the HPV75 rotary group fit?

HPV75 is a main pump in Komatsu's HPV piston family, in the mid-size class between the HPV55 and the HPV90/95 used on the PC200. The rotary group must match the HPV75 code for block, pistons and valve plate to restore correct flow.

Should I replace the whole rotary group or one part?

If the valve plate, swash plate and block are scored or the clearances are loose, replacing the full HPV75 rotary group restores pressure and flow more reliably than piecemeal repair. Replacing single parts makes sense only when the rest stay within tolerance.

How do I tell an HPV75 group from an HPV55 or HPV90?

Block size, piston count and valve-plate profile differ: the HPV55 sits on smaller machines, the HPV90/95 on PC200-class machines, and the HPV75 in between. Send Việt Trung Hải the code stamped on the pump and we pull the right HPV75 group from JIC — correct code, correct interchange tolerances — or a genuine unit.

Get a quote

Request a quote: Rotary group kit – Komatsu HPV75

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides