
Cylinder block – Komatsu HPV75
Quick answer
The HPV75 cylinder block is the barrel holding the piston bores inside the Komatsu HPV-series piston main pump used on mid-size crawler excavators.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies HPV75 blocks machined by JIC to the code and to interchange tolerance, ready for the original housing, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV75
- Condition
- New, correct code
- Availability
- On request
What the HPV75 cylinder block fits
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate to draw and push oil. It sits at the heart of the Komatsu HPV75 axial piston main pump, a unit fitted to mid-size crawler excavators, working with the pistons and valve-plate face to build pressure and flow.
Signs it needs replacing
A scored or pitted valve-plate face, or worn, oval piston bores, let oil slip past, so the pump weakens, boom and bucket slow under load, and oil heats up. Whining, vibration, or metal particles in the oil are further clues.
Choosing quality parts
As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies HPV75 cylinder blocks machined by JIC itself — heat-treated alloy steel, precision bores and running face, interchange tolerances on the HPV75 code, so the block goes into the original pump housing with no extra machining. Genuine blocks are on the shelf as well. Contact us for a fast quote.
Frequently asked questions
Which pump and machine does the HPV75 cylinder block fit?
It is the block inside the Komatsu HPV75 axial piston main pump, a unit used on mid-size crawler excavators. Check your pump code and markings before ordering so the block matches your exact unit.
When should the cylinder block be replaced?
When the pump weakens, boom and bucket slow under load, oil heats quickly, or you hear whining and find metal particles in the oil. Inspect the valve-plate face and bores; replace the block if scored, pitted, or worn oval.
Will the JIC part fit a Komatsu pump correctly?
Yes. Việt Trung Hải is an authorized JIC Hydraulics distributor, and the JIC HPV75 block is machined to the code with splines and bore clearance on interchange tolerance, so it installs directly into the original Komatsu HPV75 pump with nothing to adjust.
Get a quote
Request a quote: Cylinder block – Komatsu HPV75
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVPin – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVBall guide – Komatsu HPV75HPV75On requestView · get a quoteTechnical handbook