
Rotary group kit – Komatsu HPV95
Quick answer
The HPV95 rotary group is the rotating assembly that generates flow and pressure inside the Komatsu HPV main pump, fitted to roughly 20-tonne excavators such as the Komatsu PC200.
Việt Trung Hải supplies the correct part — Komatsu genuine and JIC Hydraulics — meeting a standard housing at the right clearance, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV95
- Condition
- New, correct code
- Availability
- On request
What the HPV95 rotary group fits
The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that produces the pump's flow and pressure. The HPV95 kit is the rotary group of the Komatsu HPV main pump used on roughly 20-tonne excavators such as the Komatsu PC200.
When to replace it
Watch for weak lifting or slow, sluggish movements at full throttle, a pump running hot or whining from internal leakage, and scoring on the valve plate or swash plate with metal debris in the oil. These point to worn contact faces letting oil slip past instead of building pressure.
Choosing quality parts
Việt Trung Hải supplies the correct HPV95 rotary group — Komatsu genuine and JIC Hydraulics, each built to the interchange tolerances of the code, so the group meets a standard housing at the right clearance with no reaming. Contact us for a fast quote.
Frequently asked questions
Which excavator does the HPV95 rotary group fit?
The HPV95 is the rotary group for the Komatsu HPV main pump, typically fitted on around 20-tonne excavators such as the Komatsu PC200. It is the rotating assembly that generates the pump's flow and pressure. Contact Việt Trung Hải to confirm your machine and get a quote.
Should I replace the whole rotary group or just some parts?
When the cylinder block, valve plate and swash plate are scored or evenly worn, replacing the full rotary group restores pressure and flow more reliably than swapping single parts. Việt Trung Hải advises based on your pump's actual condition to pick the right option.
Anything to watch after fitting a new HPV95 group?
Fill the pump with oil before cranking, bleed the case, change the filters and flush the hydraulic oil, then run unloaded before working it up. The JIC HPV95 group is built to the code and its interchange tolerances, so it meets a standard housing at the right clearance. Việt Trung Hải carries JIC and Komatsu genuine units.
Get a quote
Request a quote: Rotary group kit – Komatsu HPV95
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVPiston pump – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVRear drive shaft – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVFront drive shaft – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV95HPV95On requestView · get a quoteTechnical handbook