Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Piston pump – Komatsu HPV95

Komatsu · HPV

Piston pump – Komatsu HPV95

New, correct codeOn requestHPV95

Quick answer

The HPV95 is Komatsu's main piston pump, feeding the entire hydraulic system on PC200-class excavators.

Việt Trung Hải supplies genuine HPV95 pumps and JIC rotating groups made to the correct code, right on clearance inside the original housing, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Piston pump
Brand / pump line
Komatsu · HPV
Model code
HPV95
Condition
New, correct code
Availability
On request

What the HPV95 pump fits

The HPV95 is Komatsu's main hydraulic pump — a tandem, variable-displacement axial piston unit that draws power from the engine and feeds the whole system: boom, arm, bucket, travel and swing. It is the familiar main pump on Komatsu PC200-class excavators. An on-pump regulator tilts the swash plate under load to hold power steady and save fuel.

Signs it needs replacing

A worn HPV95 shows up as slow boom lift, lost digging force in hard ground, and jerky multi-function moves, often with hotter oil and an unusual whine. If valves and regulator check out, the rotating group is usually the cause.

Choosing quality parts

Việt Trung Hải is an authorized JIC Hydraulics distributor, supplying HPV95 pumps and JIC rotating groups made to the correct code — shoes, block and swash plate cut to tolerance, so the clearance is right inside the original housing — alongside genuine Komatsu parts. Contact us for a fast quote.

Frequently asked questions

Which excavator does the HPV95 pump fit?

The HPV95 is Komatsu's main pump, typically fitted to PC200-class excavators. It supplies oil to the boom, arm, bucket, travel and swing circuits. Contact Việt Trung Hải to confirm the exact fit for your machine's model year.

Should I fit a whole HPV95 pump or just the rotating group?

It depends on condition. If only the piston shoes, cylinder block or swash plate are worn, a rotating group is enough and keeps the original housing. If the housing or regulator is badly damaged, fit the complete assembly. Việt Trung Hải advises based on your case.

Does the regulator need resetting after an HPV95 rotating group?

The regulator keeps its existing setting and needs no resetting, provided it is still healthy. A JIC group made to the HPV95 code sits at the right clearance in the housing; bleed the air, warm the oil, then check pressure and boom speed. If pressure will not build, inspect the regulator and relief valve.

Get a quote

Request a quote: Piston pump – Komatsu HPV95

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides