
Rotary group kit – Rexroth A8VO107
Quick answer
The A8VO107 rotary group is the rotating assembly inside the Rexroth/Uchida main pump — cylinder block, pistons, valve plate, swash plate and shaft — that makes the pump's flow and pressure, fitted on roughly 20-tonne excavators. When the pump loses power, drops pressure or overheats, the set is usually changed whole.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the correct code in genuine and JIC form, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8VO107
- Condition
- New, correct code
- Availability
- On request
What the A8VO107 rotary group fits
The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that produces the pump's flow and pressure. This set fits the Rexroth/Uchida A8VO107 main pump, a bent-axis piston pump used on roughly 20-tonne excavators. Every drop of oil sent to the control valve, cylinders and motors starts here.
When to replace
A worn rotary group shows as lost power, slow boom and bucket under load, and weak combined movements. A scored valve plate and swash face cause internal leakage, overheating and knocking under throttle. When pressure drops on lift, replace the whole set rather than patch single parts.
Genuine-quality parts
Việt Trung Hải supplies the A8VO107 rotary group to the correct code, in genuine and JIC form. As an authorized JIC Hydraulics distributor we take stock straight from the maker: the JIC set is machined with the right material and surface hardness and holds its clearance, so the pump makes pressure again once it is together. Send your pump code for a fast quote.
Frequently asked questions
Which excavators use the A8VO107 rotary group?
The A8VO107 is a Rexroth/Uchida bent-axis piston main pump used on roughly 20-tonne excavators. The rotary group covers the cylinder block, pistons, valve plate, swash plate and shaft. Send your pump code and machine model so we can confirm the exact set.
Should I replace the whole rotary group or single parts?
Once the valve plate and swash face are scored and the block and pistons are past tolerance, single-part swaps rarely restore pressure or life. A full rotary group keeps the parts matched, so the pump runs stronger and lasts longer. We advise based on actual condition.
Does Việt Trung Hải stock JIC parts for the A8VO107?
Yes. As an authorized JIC Hydraulics distributor we keep the A8VO107 rotary group in JIC form, made to the code with attention to material and the running faces, alongside genuine units. Send your pump code for a fast quote and current availability.
Get a quote
Request a quote: Rotary group kit – Rexroth A8VO107
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VODrive shaft – Rexroth A8VO107A8VO107On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8VO107A8VO107On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8VO107A8VO107On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8VO107A8VO107On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8VO107A8VO107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quoteTechnical handbook