Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Rexroth A8VO107

Uchida/Rexroth · A8VO

Cylinder block – Rexroth A8VO107

New, correct codeOn requestA8VO107

Quick answer

The Rexroth A8VO107 cylinder block is the barrel holding the piston bores in the A8VO axial-piston pump, used as the main pump on roughly 20-tonne excavators.

Việt Trung Hải supplies the correct part, genuine or JIC, inspected before delivery and quoted fast.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Uchida/Rexroth · A8VO
Model code
A8VO107
Condition
New, correct code
Availability
On request

Rexroth A8VO107 cylinder block: pump and machine fit

The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate to draw and push hydraulic oil. The A8VO107 belongs to the Rexroth-Uchida A8VO axial-piston range, the main pump on roughly 20-tonne excavators. The block face against the valve plate and the fit of each piston bore set the pressure and flow the pump can deliver.

When to replace

Watch for a weak, slow machine, hydraulic oil that heats up fast, rising internal leakage, a scored or pitted block face, and whining or knocking inside the pump.

Choosing quality parts

The block runs under constant pressure and friction, so material, heat treatment and machining accuracy are critical. Genuine and JIC Hydraulics blocks alike hold bore tolerance and face flatness, so the A8VO107 goes back into the original pump and pressure comes with it. Việt Trung Hải supplies the correct code, checked before delivery, and quotes quickly.

Frequently asked questions

Which excavator does the A8VO107 block fit?

The A8VO107 is a part inside the Rexroth-Uchida A8VO main pump, typically found on roughly 20-tonne crawler excavators. Send your pump code and machine model and Việt Trung Hải will confirm the exact fit before quoting.

How do I know the cylinder block is worn?

Common signs are a weak, slow machine, hydraulic oil heating up quickly, rising internal leakage and a whining pump. On teardown, the block face against the valve plate and the piston bores are usually scored or pitted. Check them together with the valve plate.

Does a JIC A8VO107 block need clearance adjustment?

No. JIC Hydraulics holds the piston-bore tolerance and face flatness of the A8VO107 code, with material and heat treatment rated for high pressure, so the block goes into the original pump and pressure comes back. Việt Trung Hải inspects every part before delivery.

Get a quote

Request a quote: Cylinder block – Rexroth A8VO107

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides