
Rotary group kit – Rexroth A8VO200
Quick answer
The Rexroth-Uchida A8VO200 rotary group is the rotating assembly that generates flow and pressure inside an A8VO piston main pump, used on roughly 35-tonne excavators.
VTH, an authorized JIC Hydraulics distributor, supplies genuine and JIC parts by exact code that fit the original housing as they come, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8VO200
- Condition
- New, correct code
- Availability
- On request
The rotary group is the rotating core inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates the pump's flow and pressure.
What the A8VO200 rotary group fits
The Rexroth-Uchida A8VO200 rotary group belongs to the A8VO axial-piston main-pump family used on roughly 35-tonne excavators. It replaces the internal group of an A8VO200 main pump and drops into the original housing by matching part code, with no rework needed.
When to replace it
Weak output, pressure loss and sluggish boom or travel under load are the classic signs, often with hotter oil and rising noise as internal leakage grows. Scored valve and swash faces plus worn pistons and block mean a full rotary-group swap beats piecemeal repair.
Genuine-quality parts
Under high pressure and constant friction, material and machining accuracy decide service life. As an authorized JIC Hydraulics distributor, VTH supplies A8VO200 rotary groups in genuine and JIC form; the JIC set uses alloy steel with wear faces cut to the code and piston clearance held tight, so a standard A8VO200 housing runs at full flow. Contact us for a fast quote.
Frequently asked questions
Which excavator does the A8VO200 rotary group fit?
The Rexroth-Uchida A8VO200 rotary group belongs to the A8VO axial-piston main-pump family used on roughly 35-tonne excavators. The matched-code group drops into the original A8VO200 pump housing without rework.
Should I replace the whole rotary group or just worn parts?
Once the valve and swash faces are scored and pistons or the block are worn with excess clearance, replacing the full A8VO200 rotary group is more reliable than piecemeal repair, since matched parts wear evenly and avoid early re-failure.
How is a JIC rotary group different from no-name parts?
JIC groups use alloy steel with properly finished valve and swash faces and tightly controlled piston clearance, so they hold pressure and last longer than no-name parts. VTH is an authorized JIC distributor supplying exact-code parts.
Get a quote
Request a quote: Rotary group kit – Rexroth A8VO200
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VODrive shaft – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quoteTechnical handbook