
Cylinder block – Rexroth A8VO200
Quick answer
The A8VO200 cylinder block is the piston-bore barrel of the Rexroth (Uchida) A8VO main pump on roughly 35-tonne excavators. When it wears, the machine loses power and pressure, especially when the oil is hot.
Việt Trung Hải supplies genuine and JIC blocks on the correct code so flow comes back, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8VO200
- Condition
- New, correct code
- Availability
- On request
A8VO200 cylinder block: which pump it fits
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to move oil. The A8VO200 block belongs to the Rexroth (Uchida) A8VO main pump found on roughly 35-tonne excavators. It runs against the valve plate, so its face and bores must stay sealed and smooth for the pump to hold flow and pressure.
Signs it needs replacing
Weak, slow lift — worse once the oil warms up — plus pressure loss, rising internal leakage, unusual noise and overheating point to scoring on the piston bores or the distribution face. On teardown, check the bronze contact face for scoring or pitting; replacing the block with its pistons usually outlasts re-lapping.
Choosing quality
A8VO200 blocks need sound material and precise machining. Việt Trung Hải supplies genuine Rexroth and JIC blocks on the correct code, so the pump comes back to full flow after the rebuild. Send your pump code for a fast quote.
Frequently asked questions
Which excavator does the A8VO200 cylinder block fit?
The A8VO200 is the cylinder block for the Rexroth (Uchida) A8VO main pump, typically on excavators around 35 tonnes. Send your pump and machine code so Việt Trung Hải can confirm the exact part before quoting.
How do I know the cylinder block is worn?
Common signs are a weak, slow machine when the oil is hot, pressure loss and rising internal leakage. On teardown the distribution face and piston bores show scoring or pitting. Check the pistons and valve plate together.
Should the pistons go in with a new A8VO200 block?
If the distribution face is scored and the bores have gone tapered, change them together so the pump seals again. Việt Trung Hải has A8VO200 blocks in genuine Rexroth and JIC, on the correct code, with matching pistons, quoted fast from your pump code.
Get a quote
Request a quote: Cylinder block – Rexroth A8VO200
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quoteTechnical handbook