Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Rexroth A8VO55

Uchida/Rexroth · A8VO

Rotary group kit – Rexroth A8VO55

New, correct codeOn requestA8VO55

Quick answer

The Rexroth-Uchida A8VO55 rotary group is the rotating assembly inside the A8VO main pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that produces flow and pressure on roughly 13-tonne excavators. As an authorized JIC Hydraulics distributor, Việt Trung Hải ships A8VO55 groups in JIC code that go straight into the original housing, and genuine pump-maker parts as well.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Uchida/Rexroth · A8VO
Model code
A8VO55
Condition
New, correct code
Availability
On request

What the A8VO55 rotary group fits

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — the part that actually makes the pump's flow and pressure. The Rexroth-Uchida A8VO55 rotary group serves the A8VO main pump family on roughly 13-tonne excavators.

Signs it needs replacing

Weak, slow movements and loss of power under load; oil heating up fast or metal particles in the oil; whining or vibration from the pump; a scored valve plate, pitted swash plate or worn pistons. Replacing the complete rotary group is usually more economical than rebuilding single parts.

Choosing quality

Việt Trung Hải is an authorized JIC Hydraulics distributor, so a JIC-coded A8VO55 rotary group is JIC's own part: block, pistons and valve plate machined to the fit tolerances of the A8VO55 code, so it drops into the original pump housing at the correct running clearance with no reaming or lapping. Genuine pump-maker parts are stocked as well. Send your pump code and machine model for a fast quote.

Frequently asked questions

Which excavators use the A8VO55 rotary group?

The A8VO55 is a Rexroth-Uchida A8VO-series main pump, typically fitted on around 13-tonne excavators. Send your pump code and machine model so Việt Trung Hải can confirm the correct rotary group before quoting.

When should I replace the whole rotary group instead of single parts?

When the pump loses pressure and power, the oil shows metal particles, or the valve plate and block are deeply scored, replace the complete rotary group. It restores tight clearances and runs more reliably than swapping a few parts.

Does a JIC rotary group need extra machining to fit an original A8VO55 housing?

No. The JIC group is built to the A8VO55 code and its fit tolerances, so block, pistons and valve plate go straight into the original housing at the right running clearance. Clean the housing, check the bearing and shaft, and reassemble. Việt Trung Hải is an authorized JIC Hydraulics distributor and also stocks genuine parts.

Get a quote

Request a quote: Rotary group kit – Rexroth A8VO55

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides