
Rear drive shaft – Kawasaki K5V140DT
Quick answer
The Kawasaki K5V140DT rear drive shaft carries drive to the second rotary group in the K5V140DT tandem pump — the main pump on ~20-tonne excavators like the Kobelco SK200/SK210 and Doosan DX225.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC shafts on code that fit the original pump, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Kawasaki · K5V
- Model code
- K5V140DT
- SKU
- 2021-590-1-20
- Condition
- New, correct code
- Availability
- On request
Kawasaki K5V140DT rear drive shaft — which pump it fits
This is the rear (output) drive shaft for the Kawasaki K5V140DT main pump — the shaft that carries drive to the second rotary group in the tandem pump. Unlike the front shaft, which takes torque straight from the engine, the rear shaft splines into the rear cylinder block to turn the second pump section. The K5V140DT is a load-sensing piston pump on ~20-tonne excavators such as the Kobelco SK200/SK210 and Doosan DX225.
When to replace
Worn shaft splines show up as axial play, knocking under throttle, or vibration on load. Rounded or galled splines cause pressure loss, weak power and fast heating; replace the shaft before the damage spreads to the cylinder block.
Choosing quality parts
Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC K5V140DT shaft has its splines milled to code and its case hardness set to spec, so the rotary group runs evenly loaded once the shaft is in. Genuine Kawasaki shafts carry the same code. Contact us for a fast quote.
Frequently asked questions
How does the K5V140DT rear shaft differ from the front shaft?
The front shaft takes torque directly from the engine; the rear shaft transfers drive to the second pump group in the tandem pump. They differ in position and spline coupling, so confirm which one you need before ordering.
Which excavators use the K5V140DT pump?
The K5V140DT is a ~20-tonne class main pump, common on the Kobelco SK200/SK210 and Doosan DX225. The rear shaft fits inside this pump. Send your machine model and a photo of the old shaft so we can confirm the right part.
When should the drive shaft be replaced?
Replace it when you notice axial play, knocking under throttle, or rounded, worn splines that cause weak pump output and overheating. Changing it early prevents damage spreading to the cylinder block and swash plate.
Get a quote
Request a quote: Rear drive shaft – Kawasaki K5V140DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K5VRotary group kit – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VFront drive shaft – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VSwash plate – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VShoe plate – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VRetainer plate – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VSpring – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VValve plate – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VPiston – Kawasaki K5V140DTK5V140DTOn requestView · get a quoteTechnical handbook