
Valve plate – Kawasaki K5V140DT
Quick answer
The Kawasaki K5V140DT valve plate is the high/low-pressure porting plate in the K5V140 main pump, fitted to roughly 20-tonne excavators like the Kobelco SK210 and Doosan DX225. Việt Trung Hải supplies the correct K5V140DT part in genuine and JIC, each held to the code's flatness and thickness so it beds onto the original block. Fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kawasaki · K5V
- Model code
- K5V140DT
- SKU
- 2021-590-1-138
- Condition
- New, correct code
- Availability
- On request
Which pump the K5V140DT valve plate fits
The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. The Kawasaki K5V140DT belongs to the K5V main-pump line, specifically the K5V140 pump used on roughly 20-tonne excavators such as the Kobelco SK210 and Doosan DX225. Its sealing face and flatness set the pump's efficiency and internal tightness.
Signs of wear
As the face wears, oil leaks from the high- to the low-pressure port, flow drops, the machine goes weak and the oil runs hot. Look for scoring, wear grooves around the port kidneys, pitting or blue heat discoloration. Once scratches run deep, lapping no longer restores the seal and the plate should be replaced.
Choosing quality
Use the correct K5V140DT part — genuine Kawasaki or JIC. Việt Trung Hải distributes JIC Hydraulics and supplies JIC valve plates with the material, flatness, hardness and thickness held to the code, so the plate beds onto the original block at the clearance a new pump ran, with nothing left to do on the bench. Contact us for the right pump assembly and a fast quote.
Frequently asked questions
Which excavators use the K5V140DT valve plate?
It belongs to the Kawasaki K5V140 main pump, typically fitted to around 20-tonne excavators such as the Kobelco SK210 and Doosan DX225. Send your machine and pump numbers so Việt Trung Hải can confirm the exact assembly.
How do I know the valve plate needs replacing?
Common signs are a weak machine, dropping flow, slow cylinders and oil heating quickly. On inspection, scoring, wear grooves around the ports, pitting or heat discoloration on the face mean it should be replaced.
Does a JIC plate hold the K5V140 clearance of a new pump?
Yes. Việt Trung Hải distributes JIC Hydraulics, and the JIC plate is made to the K5V140DT code with the flatness and thickness it calls for, so it beds onto the original block at the clearance a new pump ran. Genuine Kawasaki plates are stocked as well. Contact us for advice and a fast quote.
Get a quote
Request a quote: Valve plate – Kawasaki K5V140DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K5VRotary group kit – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VRear drive shaft – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VFront drive shaft – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VSwash plate – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VShoe plate – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VRetainer plate – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VSpring – Kawasaki K5V140DTK5V140DTOn requestView · get a quote
Kawasaki · K5VPiston – Kawasaki K5V140DTK5V140DTOn requestView · get a quoteTechnical handbook