Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rear drive shaft – Kawasaki NV111DT

Kawasaki · NV

Rear drive shaft – Kawasaki NV111DT

New, correct codeOn requestNV111DT

Quick answer

The Kawasaki NV111DT rear drive shaft relays torque to the second pump group in a tandem pump, fitting the NV-series NV111DT main pump on hydraulic excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC shafts on code — front or rear — with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · NV
Model code
NV111DT
SKU
2021-590-1-21
Condition
New, correct code
Availability
On request

What the Kawasaki NV111DT rear shaft fits

This is the REAR drive shaft — the through-shaft that carries drive to the second pump group in a tandem (double) pump. Unlike the front shaft, which takes drive straight from the engine, the rear shaft receives torque relayed from the front pump and turns the second cylinder block. It fits the Kawasaki NV111DT main pump, a variable-displacement axial-piston unit in the NV series used on hydraulic excavators. Confirming front vs rear is the key selection step.

When to replace

Worn or loose splines make drive rough and knock under load. A scored or pitted seal journal leaks oil around the pump; a bent shaft causes vibration and uneven coupling wear.

Choosing quality

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC shafts on code NV111DT — heat-treated alloy steel, precision-cut splines, journals on interchange tolerance, so the shaft runs in the original pump with no rework. Genuine shafts are stocked too. Fast quote; we confirm front vs rear before dispatch.

Frequently asked questions

How does the NV111DT rear shaft differ from the front shaft?

The front shaft takes drive directly from the engine; the rear shaft relays torque to the second pump group in a tandem pump. They differ in length and end fittings, so confirm the position before ordering.

How do I know the NV111DT shaft needs replacing?

Check the splines for wear or play that causes knocking under load. A scored or pitted seal journal will leak oil, and a bent shaft vibrates. If you see these signs, replace it to avoid damaging the block and swash plate.

Does Việt Trung Hải stock JIC parts for the NV111DT shaft?

Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies NV111DT shafts on the JIC code in heat-treated alloy steel with precision-cut splines, fitting the original pump directly. Contact us to confirm the correct shaft and get a fast quote.

Get a quote

Request a quote: Rear drive shaft – Kawasaki NV111DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides