Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki NV111DT

Kawasaki · NV

Valve plate – Kawasaki NV111DT

New, correct codeOn requestNV111DT

Quick answer

The Kawasaki NV111DT valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge in the NV-series main pump used on older hydraulic excavators.

Việt Trung Hải supplies genuine and JIC NV111DT plates to code, straight into the standard pump, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · NV
Model code
NV111DT
SKU
2021-590-1-152
Condition
New, correct code
Availability
On request

What the NV111DT valve plate fits

The NV111DT valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. It belongs to Kawasaki's NV-series axial piston main pump, used on older-generation hydraulic excavators built around the NV pump. Its flatness and surface finish control how well the pump seals and holds pressure.

When to replace it

A worn or scored valve plate lets high-pressure oil leak back to the low-pressure side, so the pump weakens and loses pressure. Common signs: slow lift, weak swing, unusual heat, groaning under load, or metal particles in the oil. Pitting, burn marks, or deep scoring mean replace it before damage spreads to the block and pistons.

Choosing quality parts

Việt Trung Hải is an authorized JIC Hydraulics distributor, holding NV111DT plates from JIC to the correct code for Kawasaki NV-series pumps — they go into the standard pump housing with no fitting work. Genuine plates are available too. Call us for a fast quote.

Frequently asked questions

Which pump does the NV111DT valve plate fit?

NV111DT is the valve plate for Kawasaki's NV-series axial piston main pump, fitted on older hydraulic excavators built around the NV pump. Việt Trung Hải supplies the correct NV111DT plate with a fast quote.

How do I know the valve plate is worn?

When it wears or scores, the pump weakens and loses pressure: slow lift, weak swing, unusual heat, groaning under load, sometimes metal particles in the oil. Pitting or burn marks mean it is time to replace it.

Can you still get valve plates for the older NV111DT pump?

Yes. The NV series is old, but JIC Hydraulics still makes the NV111DT plate to code, and Việt Trung Hải sources it for these pumps as an authorized distributor. Send the code stamped on the housing and we will match it and quote fast.

Get a quote

Request a quote: Valve plate – Kawasaki NV111DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides