Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Swash plate – Kawasaki NV84DT

Kawasaki · NV

Swash plate – Kawasaki NV84DT

New, correct codeOn requestNV84DT

Quick answer

The NV84DT swash plate is the fixed angled plate in the NV-series main pump; the piston shoes slide on it and its tilt sets the oil flow.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Swash plate
Brand / pump line
Kawasaki · NV
Model code
NV84DT
SKU
2021-590-1-50
Condition
New, correct code
Availability
On request

Which pump the Kawasaki NV84DT swash plate fits

The NV84DT swash plate is the fixed, tilted plate inside the pump; the piston shoes press and slide across its face as the shaft turns. Because its angle sets the piston stroke, this is the part that governs how much oil the pump delivers. The face runs under constant high-pressure friction, so its flatness and finish drive the performance of the whole pump. NV84DT belongs to Kawasaki's NV-series axial-piston pumps, used as main pumps on excavators and hydraulic equipment.

Signs it needs replacing

A weak pump, slow lift and swing, straining under load or fast oil heating usually point to a worn plate. If the face is scored, pitted or dished, replace it — once it loses flatness the shoes leak, and the debris then scars the cylinder block.

Choosing a durable, correct part

A good plate uses the right material, a flat ground face and proper surface treatment to carry load for the long term. Việt Trung Hải is an authorized JIC Hydraulics distributor, so the JIC NV84DT plate is JIC's own part: right code, right fitting size, and it beds onto a standard Kawasaki housing with no reaming or lapping. VTH stocks genuine parts and JIC parts alike — call for a fast quote.

Frequently asked questions

What does NV84DT fit?

Kawasaki's NV-series main pump on excavators and hydraulic equipment.

What should be replaced with the plate?

Inspect and replace it together with the piston shoes and block so the faces bed in evenly.

What should I watch for when fitting a new plate?

Wash and dry the housing, oil the plate face, then set the shoes down; one leftover chip scores a fresh face straight away. The JIC NV84DT plate is on code and on fitting size, so it simply goes in.

Get a quote

Request a quote: Swash plate – Kawasaki NV84DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides