
Kawasaki · NV
Valve plate – Kawasaki NV84DT
Quick answer
The Kawasaki NV84DT valve plate is the high/low-pressure porting plate that times each piston's intake and discharge, fitting the Kawasaki NV-series piston pump used on older, mid-size machines and hydraulic cranes.
Việt Trung Hải stocks genuine plates and JIC plates cut to the same code, which drop into a standard pump and run right, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kawasaki · NV
- Model code
- NV84DT
- SKU
- 2021-590-1-157
- Condition
- New, correct code
- Availability
- On request
What the Kawasaki NV84DT valve plate fits
The NV84DT valve plate is the high/low-pressure porting plate pressed against the cylinder block; it times each piston's intake and discharge. It fits the Kawasaki NV-series axial piston pump — a main pump family found on older, mid-size construction machines and hydraulic cranes. A flat sealing face and correctly profiled kidney ports keep the plate sealed against the block, setting the pump's flow and pressure.
Signs it needs replacing
A worn valve plate shows scoring, circular scratches, cavitation pitting or heat discoloration. On the machine you get weak pumping under load, slow or jerky operation, internal leakage and pressure loss, fast oil heating and unusual noise.
Choosing quality parts
The plate has to match material, hardness and lapped flatness to seal against the block. Việt Trung Hải is an authorized JIC Hydraulics distributor: JIC machines the NV84DT plate to the same code and interchange tolerance, so it goes straight into a standard pump and holds pressure with no lapping on the bench. Genuine plates are on the shelf too. Contact VTH for a fast quote.
Frequently asked questions
Which pump does the NV84DT valve plate fit?
NV84DT is a valve plate for the Kawasaki NV-series axial piston pump, a main pump family used on older, mid-size construction machines and hydraulic cranes. Việt Trung Hải helps confirm the right part for your pump and machine.
How do I know the valve plate is worn out?
A worn valve plate shows scoring, scratches, cavitation pitting or heat discoloration. On the machine you notice weak pumping under load, slow or jerky operation, fast oil heating and pressure loss. Inspect and replace when these signs appear.
Does a JIC plate need lapping before it goes into a standard NV84DT pump?
No. JIC cuts the plate to the NV84DT code and to interchange tolerance, with the sealing face already lapped flat, so it seats on the block as it comes and the pump makes full pressure. Việt Trung Hải is an authorized JIC Hydraulics distributor and also carries genuine plates, quoting fast by code.
Get a quote
Request a quote: Valve plate – Kawasaki NV84DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · NVRotary group kit – Kawasaki NV84DTNV84DTOn requestView · get a quote
Kawasaki · NVSwash plate – Kawasaki NV84DTNV84DTOn requestView · get a quote
Kawasaki · NVRetainer plate – Kawasaki NV84DTNV84DTOn requestView · get a quote
Kawasaki · NVPiston – Kawasaki NV84DTNV84DTOn requestView · get a quote
Kawasaki · NVBall guide – Kawasaki NV84DTNV84DTOn requestView · get a quote
Kawasaki · NVCylinder block – Kawasaki NV84DTNV84DTOn requestView · get a quote
Kawasaki · NVRotary group kit – Kawasaki NV111DTNV111DTOn requestView · get a quote
Kawasaki · NVRotary group kit – Kawasaki NV137NV137On requestView · get a quoteTechnical handbook