
Friction lining – Kawasaki M2X120
Quick answer
The Kawasaki M2X120 valve plate is the high/low-pressure porting plate inside the swing motor that times each piston's intake and discharge; it fits the M2X120 motor on ~20-ton class excavators like the Kobelco SK200 and Hitachi ZX200.
Việt Trung Hải supplies JIC M2X120 plates cut to code and to thickness, so they seat on the original block with nothing to rework, and keeps genuine Kawasaki plates in stock.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X120
- SKU
- 2021-590-1-117
- Condition
- New, correct code
- Availability
- On request
The Kawasaki M2X120 valve plate is the high/low-pressure porting plate pressed against the cylinder block, timing each piston's intake and discharge. In the swing motor it distributes oil to the pistons so the upper structure rotates smoothly and steadily.
What the M2X120 valve plate fits
M2X120 is a Kawasaki swing motor used on roughly 20-ton class excavators such as the Kobelco SK200 and Hitachi ZX200/EX200. The plate must match the M2X120 code so its contact face and oil ports seat correctly against the block.
Wear signs and quality
A scored, pitted or unevenly worn face causes internal leakage: weak swing, jerky rotation, drift on stop or slow response, with the oil heating fast. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies M2X120 plates cut to code with the ports and thickness held to spec, so they seat on the motor's original block at the working clearance and there is nothing to lap or trim. Genuine Kawasaki plates are on hand as well, with fast quotes.
Frequently asked questions
Which machine does the Kawasaki M2X120 valve plate fit?
M2X120 is a Kawasaki swing motor found on roughly 20-ton class excavators such as the Kobelco SK200 and Hitachi ZX200/EX200. The valve plate must match the M2X120 code so its oil ports and contact face seat correctly against the cylinder block.
When should the M2X120 valve plate be replaced?
Replace it when swing becomes weak, jerky, drifts on stop or responds slowly, with fast oil heating and unusual noise. On teardown the face is usually scored, pitted or unevenly worn, causing internal leakage; check the block and pistons too.
Does a JIC M2X120 valve plate need any machining to fit?
None. The JIC plate carries the M2X120 code with the ports and thickness held to spec, so it goes straight onto the motor's original block at the right clearance. Việt Trung Hải is an authorized JIC distributor and advises the correct code with a fast quote for the M2X120.
Get a quote
Request a quote: Friction lining – Kawasaki M2X120
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XShoe plate – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XRetainer plate – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XValve plate – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XPin – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XPiston – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XBall guide – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XWasher – Kawasaki M2X120M2X120On requestView · get a quoteTechnical handbook