Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Pin – Kawasaki M2X120

Kawasaki · M2X

Pin – Kawasaki M2X120

New, correct codeOn requestM2X120

Quick answer

The Kawasaki M2X120 rotary group is the rotating core — cylinder block, pistons and valve plate — inside the M2X120 swing motor, converting pressurized oil into swing torque on ~20-ton excavators like the Doosan/Daewoo Solar 220.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC rotary groups to the correct code and interchange tolerances, dropping into the original motor housing, and stocks genuine parts as well, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · M2X
Model code
M2X120
SKU
2021-590-1-160
Condition
New, correct code
Availability
On request

Kawasaki M2X120 swing motor rotary group

The rotary group is the rotating core inside a piston motor — cylinder block, pistons, thrust plate and valve plate — that converts pressurized oil into rotational torque. In the Kawasaki M2X120 swing motor, it drives the upperstructure swing on ~20-ton class excavators such as the Doosan/Daewoo Solar 220.

Signs it needs replacing

Worn M2X120 rotary parts show up as weak or slow swing, jerky start, and swing drift that won't hold on a slope. Internal leakage brings extra heat, fast oil heating, and whine or knock while turning.

Choosing quality parts

Valve plate, block and pistons must hold correct tolerances and materials to seal clearances and last. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies JIC M2X120 rotary groups built to code and to interchange tolerances, dropping into the original motor housing untouched. Genuine parts are stocked as well. Contact us for technical advice and a fast quote.

Frequently asked questions

Which excavator does the Kawasaki M2X120 fit?

The M2X120 is a Kawasaki swing motor used on ~20-ton class excavators, commonly the Doosan/Daewoo Solar 220. The rotary group — cylinder block, pistons and valve plate — generates swing torque. Send your machine code and Việt Trung Hải will confirm the exact version.

When should the M2X120 rotary group be replaced?

Replace it when swing is weak or jerky at start, drifts and won't hold on a slope, or the motor runs hot and whines. Inspect the valve plate, cylinder block and pistons; heavy scoring or play in these parts means the rotary group is due.

Does a JIC rotary group need machining to go into an M2X120 housing?

No. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies JIC M2X120 rotary groups to the exact code and interchange tolerances — the old set comes out, the new one goes in. Correct materials and machining hold the running clearances tight for load capacity and durability under continuous swing duty. Genuine parts are on the shelf too.

Get a quote

Request a quote: Pin – Kawasaki M2X120

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides