
Friction lining – Kawasaki M2X146
Quick answer
The Kawasaki M2X146 valve plate (lá bố) is the porting plate inside the Kawasaki M2X146 swing motor, typically used on ~20-tonne excavators such as the Kobelco SK200 and Sumitomo SH200. Việt Trung Hải supplies JIC plates cut to the M2X146 code and thickness, so they seal on the original block with no rework, and keeps genuine plates in stock. Fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X146
- SKU
- 2021-590-1-118
- Condition
- New, correct code
- Availability
- On request
The valve plate (lá bố) is the porting plate pressed against the cylinder block that times each piston's intake and discharge. Inside the Kawasaki M2X146 swing motor it distributes high- and low-pressure oil so the piston group produces the torque that swings the upper structure.
What the M2X146 valve plate fits
M2X146 is a common Kawasaki swing motor on mid-size excavators around the 20-tonne class, such as the Kobelco SK200 and Sumitomo SH200. The plate must match the exact part and port layout to seal against the block.
When to replace, and choosing quality
A worn plate shows scoring, pitting, heat discolouration or loss of flatness; on the machine you feel weak, slow or jerky swing, internal leakage that lets the house drift on a slope, and an overheating motor. Flatness, finish and hardness decide sealing and life. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies JIC M2X146 plates cut to code and to thickness — they land on the original block with the ports lined up and nothing left to lap. Genuine plates are stocked too; contact us for a fast quote.
Frequently asked questions
Which excavators use the M2X146 valve plate?
M2X146 is a common Kawasaki swing motor on mid-size excavators around the 20-tonne class, such as the Kobelco SK200 and Sumitomo SH200. The valve plate sits in the motor's rotating group and must match the exact part and port layout.
How do I know the valve plate is worn?
Off the machine, look for scoring, pitting, heat discolouration or loss of flatness on the sealing face. On the machine, weak or jerky swing, drift when parked on a slope and an overheating motor all point to a plate that no longer seals.
Does a JIC M2X146 plate restore the clearance of a new motor?
It does. JIC cuts the M2X146 plate to the same code, flatness and thickness, so pressed against the original block it returns the working clearance the motor had when new, with no lapping on the bench. Việt Trung Hải is an authorized JIC Hydraulics distributor and also carries genuine plates. Contact us for correct-code advice and a fast quote.
Get a quote
Request a quote: Friction lining – Kawasaki M2X146
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XDrive shaft – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XRetainer plate – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XValve plate – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XPin – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XWasher – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XSteel ring – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XCylinder block – Kawasaki M2X146M2X146On requestView · get a quoteTechnical handbook