Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Washer – Kawasaki M2X146

Kawasaki · M2X

Washer – Kawasaki M2X146

New, correct codeOn requestM2X146

Quick answer

The Kawasaki M2X146 washer is a shim inside the rotary group of the M2X146 swing motor, setting clearance and axial end-play so the rotating parts stay aligned. M2X146 fits around 20-ton excavators such as the Hitachi EX/ZX200, Kobelco SK200 and Sumitomo SH200.

Việt Trung Hải stocks genuine Kawasaki and JIC parts made to code that fit the original rotary group as they are, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · M2X
Model code
M2X146
SKU
2021-590-1-228
Condition
New, correct code
Availability
On request

What the M2X146 washer fits

The Kawasaki M2X146 washer (shim) sits inside the rotary group — the spinning core of cylinder block, pistons, valve plate, swash plate and shaft that turns high-pressure oil into swing torque. The washer sets running clearance and axial end-play and carries thrust, keeping the rotating parts correctly aligned. M2X146 is a Kawasaki swing motor for ~20-ton excavators such as the Hitachi EX/ZX200, Kobelco SK200 and Sumitomo SH200.

Signs it needs replacing

A worn or deformed washer opens up clearance, causing axial play and internal leakage — weak or jerky swing, knocking, vibration and heat. Left alone, the wear spreads to the valve plate and block.

Choosing the right part

Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC M2X146 washer is machined to the same code and interchange tolerance, so it drops into the original Kawasaki rotary group at the right clearance with no lapping or extra shimming. We hold genuine Kawasaki and JIC stock by motor generation. Send the code M2X146 for a fast quote.

Frequently asked questions

Which excavators does the M2X146 washer fit?

M2X146 is a Kawasaki swing motor used on roughly 20-ton excavators such as the Hitachi EX/ZX200, Kobelco SK200 and Sumitomo SH200. The washer sits inside its rotary group. Send your machine model and motor number so we confirm the exact part before quoting.

How do I know the motor washer is worn?

Common signs are weak or jerky swing when starting and stopping, knocking, vibration and a hotter motor, caused by axial play and internal leakage. Check early to stop the wear spreading to the valve plate and cylinder block.

Does the JIC M2X146 washer need any fitting work in the original motor?

No. It is made to the M2X146 code and to interchange tolerance, so it goes straight into the original Kawasaki rotary group at the right clearance — no lapping, no extra shimming. Việt Trung Hải is an authorized JIC Hydraulics distributor and stocks genuine parts as well; send the code M2X146 for a fast quote.

Get a quote

Request a quote: Washer – Kawasaki M2X146

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides