
Friction lining – Kawasaki M2X150
Quick answer
The Kawasaki M2X150 valve plate is the porting plate that times each piston's intake and discharge inside the M2X150 swing motor, common on 20-tonne-class excavators like the Kobelco SK200 and Hitachi ZX200. Việt Trung Hải supplies genuine and JIC plates, each to the same code and port profile so it seats in the original motor at the right clearance. Fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X150
- SKU
- 2021-590-1-119
- Condition
- New, correct code
- Availability
- On request
What the M2X150 valve plate does
The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. Inside the Kawasaki M2X150 swing motor it takes the full pressure reversal every time the upper structure swings left and right. M2X150 is a common swing motor on 20-tonne-class excavators such as the Kobelco SK200, Hitachi ZX200/EX200 and Sumitomo SH200.
When to replace
Weak or jerky swing, drift when stopping, a whine, and a hot motor housing point to a worn valve plate. Scoring, pitting or heat discoloration means the clearance has opened and oil is leaking across the face. Left too long, the wear spreads to the cylinder block and piston shoes.
Choosing the right part
Việt Trung Hải supplies genuine Kawasaki M2X150 valve plates and JIC plates — same code, same port profile, each one seating in the original motor at the clearance it was built for, with nothing to rework. Contact us for advice on your machine and a fast quote.
Frequently asked questions
Which excavators use the M2X150 valve plate?
M2X150 is a Kawasaki swing motor fitted to 20-tonne-class excavators such as the Kobelco SK200, Hitachi ZX200/EX200 and Sumitomo SH200. The valve plate sits inside this motor, so tell us your machine model to match the correct part.
How do I know the swing-motor valve plate is worn?
Weak, jerky or drifting swing, a whining noise and an unusually hot motor are common signs. On inspection, a scored, pitted or heat-discoloured face means the clearance has opened up and the plate should be replaced.
How do I pick the right M2X150 plate for my motor?
Send the motor number, machine model and a photo of the old plate; Việt Trung Hải matches the port profile and confirms the code. With the right M2X150 code, a JIC plate or a genuine one seats in the original motor at the correct clearance with no rework. Contact us for advice and a fast quote.
Get a quote
Request a quote: Friction lining – Kawasaki M2X150
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XDrive shaft – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XShoe plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XRetainer plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XValve plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XPin – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XBall guide – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XWasher – Kawasaki M2X150M2X150On requestView · get a quoteTechnical handbook