
Washer – Kawasaki M2X150
Quick answer
The Kawasaki M2X150 washer is a shim that sets running clearance in the rotary group of the M2X150 swing motor, used on ~30-ton crawler excavators such as the Kobelco SK300 and Hyundai R290/R300.
Việt Trung Hải stocks genuine and JIC Hydraulics shims cut to the exact M2X150 code and interchange tolerance, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X150
- SKU
- 2021-590-1-229
- Condition
- New, correct code
- Availability
- On request
The washer is a shim that sets running clearance inside the rotary group of the Kawasaki M2X150 swing motor — the cylinder block, pistons, valve plate and swash plate that turn hydraulic flow into slew torque. M2X150 powers swing on large crawler excavators in the ~30-ton class (Kobelco SK300, Hyundai R290/R300 family).
When the shim wears, deforms or is the wrong thickness, clearance drifts and the motor weakens — slow, jerky swing, slew drift on slopes, internal leakage, whine, fast oil heating and metal in the oil. Left too long, the cylinder block and valve plate wear with it.
The shim must match M2X150 exactly — correct thickness, flat, hard enough to hold clearance under load. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC shim is cut to the M2X150 code and interchange tolerance, so it holds the running clearance the motor had when new. Genuine and JIC stock sits on the shelf by motor generation. Contact us for a fast quote.
Frequently asked questions
Which excavators use the M2X150 washer?
M2X150 is a Kawasaki swing motor fitted to roughly 30-ton crawler excavators such as the Kobelco SK300 and Hyundai R290/R300. The washer sits inside the motor's rotary group. Send your machine model and we will confirm the exact fit.
How do I know the rotary-group washer is worn?
Common signs are weak, slow swing, jerking when starting or stopping, slew drift on slopes, whining noise, fast oil heating and metal particles in the oil. If you see these, check the internal clearance and replace the washer with the correct part.
How do I pick the right M2X150 washer for my motor?
Send the number stamped on the motor housing with your machine model, and Việt Trung Hải will match the shim thickness for that M2X150 build. As an authorized JIC Hydraulics distributor we keep genuine and JIC shims on the shelf, each made to code so clearance comes out right in the original rotary group, and we quote fast.
Get a quote
Request a quote: Washer – Kawasaki M2X150
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XDrive shaft – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XShoe plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XRetainer plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XFriction lining – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XValve plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XPin – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XBall guide – Kawasaki M2X150M2X150On requestView · get a quoteTechnical handbook