Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Ball guide – Kawasaki MX80

Kawasaki · MX

Ball guide – Kawasaki MX80

New, correct codeOn requestMX80

Quick answer

The Kawasaki MX80 ball guide and port plate steer the piston shoes onto the swash plate and time oil flow for each piston inside a Kawasaki MX-series hydraulic unit.

Việt Trung Hải supplies genuine and JIC parts to the correct MX80 code with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Kawasaki · MX
Model code
MX80
SKU
2021-590-1-211
Condition
New, correct code
Availability
On request

What the Kawasaki MX80 ball guide fits

The MX80 ball guide and port plate are the guide parts inside the rotating group of a Kawasaki MX-series hydraulic unit. The ball guide holds the piston shoes at the correct angle against the swash plate as the group turns; the port plate times oil in and out for each piston. This is the correct code for the Kawasaki MX80 unit.

Signs of wear

Pitting, scoring or a worn lip on the ball face lets the shoes wobble. A scratched or scorched port plate face, internal leakage, power loss, overheating, or metal particles in the oil all point to a rotating-group rebuild.

Choosing quality parts

These parts run under constant load and friction, so material, surface hardness and flatness set their life. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the JIC MX80 set cut to the code, in the right material and to fitting tolerance, so it goes into the original unit as it is. Genuine parts are sold here too. Send code MX80 and your machine model for a fast quote.

Frequently asked questions

Which Kawasaki unit does the MX80 ball guide fit?

It is the ball guide and port plate for a Kawasaki MX-series hydraulic unit, code MX80. Send the numbers cast on your unit and the excavator model so we can confirm the exact part before quoting and shipping.

When should the ball guide and port plate be replaced?

Replace them when the faces show pitting, scoring or a worn lip, when metal appears in the oil, or when the pump loses power and overheats. Renew them together with the piston shoes to restore performance.

Does the JIC MX80 set need any adjustment when it goes in?

No. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC MX80 set is cut to the code with the right material, surface hardness and flatness, so it goes into the original piston group as it is and holds up over machine hours.

Get a quote

Request a quote: Ball guide – Kawasaki MX80

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides