
Cylinder block – Kawasaki DNB808
Quick answer
The Kawasaki DNB808 cylinder block is the barrel that holds the piston bores in a piston pump, fitting Kawasaki DNB-series main pumps on hydraulic excavators. It is the highest-loaded, fastest-wearing part in the pump.
Việt Trung Hải, an authorized JIC distributor, supplies JIC and genuine blocks on code with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kawasaki · DNB
- Model code
- DNB808
- SKU
- 2021-590-1-239
- Condition
- New, correct code
- Availability
- On request
What the Kawasaki DNB808 cylinder block fits
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate inside these bores to draw and push oil, generating flow for the whole hydraulic system. DNB808 is the block code for Kawasaki piston pumps, fitting DNB-series main pumps used on hydraulic excavators. It is the highest-loaded, fastest-wearing part in the pump assembly.
Signs it needs replacing
A worn block shows scoring, pitting or discoloration on the face that meets the valve plate, and widened piston-bore clearance. The machine loses power, the boom slows, it shudders under load, oil overheats and metal debris appears. Left too long, a failing block takes out the pistons, valve plate and the whole pump.
Choosing quality parts
Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC Kawasaki DNB808 block has its piston bores and contact face machined to the tolerances that belong to that code, so it goes into a standard pump housing and the group turns evenly instead of loading one side under high pressure. Genuine blocks are stocked alongside. Call us for the right part and a fast quote.
Frequently asked questions
Which pump does the Kawasaki DNB808 cylinder block fit?
DNB808 is the block code for Kawasaki DNB-series piston pumps used as main pumps on hydraulic excavators. Việt Trung Hải verifies the correct part against your pump and machine model before quoting to ensure a proper fit.
When should the cylinder block be replaced?
Replace it when the machine loses power, the boom slows, it shudders under load, oil overheats or metal debris appears. Scoring and pitting on the valve-plate face plus widened bore clearance confirm the block is worn.
Does a JIC DNB808 block need machining before it goes into a standard housing?
No. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC block is made on the correct code and to original fit tolerances, so it goes straight into the housing with no boring or lapping. Just clean the pump cavity, check the shaft and valve plate, and assemble in order.
Get a quote
Request a quote: Cylinder block – Kawasaki DNB808
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · DNBValve plate – Kawasaki DNB808DNB808On requestView · get a quote
Kawasaki · DNBRotary group kit – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBRotary group kit – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBDrive shaft – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBSwash plate – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBRetainer plate – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBRetainer plate – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBFriction plate – Kawasaki DNB50DNB50On requestView · get a quoteTechnical handbook