
Cylinder block – Kawasaki M2X150
Quick answer
The Kawasaki M2X150 cylinder block is the piston barrel inside the M2X swing motor used on roughly 20-ton class excavators, and it governs the motor's sealing and swing torque.
Việt Trung Hải has genuine and JIC M2X150 blocks in stock to the same code, fitting the original housing at the correct clearance, with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X150
- SKU
- 2021-590-1-255
- Condition
- New, correct code
- Availability
- On request
What the M2X150 cylinder block fits
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft. In the Kawasaki M2X swing motor, pressurized oil drives the pistons in these bores and turns into swing torque. The M2X150 block belongs to the M2X swing-motor family used on roughly 20-ton class excavators, turning the upper structure.
Signs it needs replacing
A worn or scored block shows up as weak or slow swing, drift when stopping, and internal leakage — with a scored valve-plate face, tapered bores, oil that overheats, and metal particles in the oil.
Genuine quality and a fast quote
Việt Trung Hải is an authorized JIC Hydraulics distributor with M2X150 blocks in stock in JIC and genuine form. The JIC block uses hardened material, with bores and sealing face machined to the M2X150 tolerances, so it holds the same seal as a new unit once it is in the original housing. Contact us to confirm the code and get a fast quote.
Frequently asked questions
Which motor and excavator does the M2X150 block fit?
The M2X150 is a cylinder block from the Kawasaki M2X swing-motor family, typically fitted on roughly 20-ton class excavators as part of the upper-structure swing drive. Send your motor code and machine model and we will confirm the exact part.
How do I know the swing-motor cylinder block is worn?
Common signs are weak or slow swing, drift when stopping, a scored valve-plate face and tapered bores, oil overheating, and metal particles in the oil. Inspect early to avoid damage spreading to the pistons and valve plate.
Does a JIC block hold the correct clearance in a stock M2X150?
Yes. The JIC M2X150 block is machined to fitting tolerance with hardened material, correct bores and sealing face, so it sits at the right working clearance in the original housing. Việt Trung Hải is an authorized JIC Hydraulics distributor and also carries genuine parts; contact us for a fast quote.
Get a quote
Request a quote: Cylinder block – Kawasaki M2X150
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XDrive shaft – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XShoe plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XRetainer plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XFriction lining – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XValve plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XPin – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XBall guide – Kawasaki M2X150M2X150On requestView · get a quoteTechnical handbook