
Cylinder block – Komatsu HPV160
Quick answer
The Komatsu HPV160 cylinder block is the rotating piston barrel inside the main piston pump on PC400-class Komatsu excavators, around 40 tonnes, where the pistons move the hydraulic oil.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies HPV160 blocks machined by JIC to the code, ready to seat in the original housing, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV160
- Condition
- New, correct code
- Availability
- On request
The cylinder block is the rotating barrel that holds the piston bores; each piston reciprocates in its bore to draw and discharge hydraulic oil. On the Komatsu HPV160 main pump, it is the most heavily loaded part in the assembly.
Which pump the HPV160 block fits
The HPV160 is the main piston pump on large Komatsu excavators in the PC400 class, around 40 tonnes. The block mates with the valve plate and the HPV piston set, so the part you fit must match the HPV160 code exactly for the running faces and bores to seat.
When to replace
Weak pump and slow, sluggish movement when the oil is hot; a scored or pitted block face leaking internally; worn piston bores with metal particles in the oil.
Choosing quality parts
As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies HPV160 cylinder blocks machined by JIC to the code — material, heat treatment and surface finish where they belong, and interchange tolerances that let the block seat in the original pump housing with no fitting work. Genuine blocks are stocked too. Contact us for the right code and a fast quote.
Frequently asked questions
Which excavator does the HPV160 cylinder block fit?
The HPV160 is the main piston pump on large Komatsu excavators in the PC400 class, around 40 tonnes. The cylinder block sits inside this pump, so the block you fit must match the HPV160 code to line up with the valve plate and piston set.
When should the cylinder block be replaced?
Replace it when the pump goes weak and the machine slows under hot oil, when the block face against the valve plate is scored and leaking internally, or when the piston bores are worn and metal appears in the oil. Replace the mating set together.
Does the JIC HPV160 block need lapping before it goes in?
No. JIC Hydraulics machines the HPV160 block to code, with thickness and face flatness inside interchange tolerance, so it seats in the original pump housing as delivered. Lapping only thins it and opens the clearance. Việt Trung Hải, an authorized JIC distributor, confirms the code and quotes fast.
Get a quote
Request a quote: Cylinder block – Komatsu HPV160
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVRear drive shaft – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVFront drive shaft – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV160 (rear)HPV160On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV160 (front)HPV160On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV160HPV160On requestView · get a quoteTechnical handbook