
Rotary group kit – Komatsu KPV90
Quick answer
The Komatsu KPV90 rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and shaft — that creates flow and pressure, fitted to the KPV-series main pump on mid-size excavators.
Việt Trung Hải is an authorized JIC Hydraulics distributor supplying genuine and JIC parts, each machined to the code and ready to go straight into a standard housing, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Komatsu
- Model code
- KPV90
- Condition
- New, correct code
- Availability
- On request
What the KPV90 rotary group is
The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — where the flow and pressure are actually generated. The Komatsu KPV90 rotary group replaces the worn internals of the KPV-series main pump on mid-size excavators, so you rebuild the pump instead of buying a whole new one.
Signs it needs replacing
Gradual power loss, slow boom lift or swing under load, fast-heating oil, and metal particles in the tank. On teardown you often find a scored valve plate, loose pistons, or an unevenly worn cylinder block — all signs of rising internal leakage that no regulator adjustment can fix.
Choosing quality parts
Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC KPV90 rotary group is machined to the code with the correct steel and surface hardness, so block and valve plate sit at the right clearance and the pump comes back to full flow. Genuine Komatsu units are stocked as well. Send your pump code and machine model for a fast quote.
Frequently asked questions
Which pump does the KPV90 rotary group fit?
The KPV90 is the rotary group for the KPV-series main pump on mid-size Komatsu excavators. Send the full code on the pump body and your machine model so we can match the exact assembly, as one series has several variants.
Should I replace the rotary group or the whole pump?
If the housing, regulator and shaft are still good, fitting the KPV90 group is the neat fix — the correct code goes into a standard housing and the pump returns to proper flow and pressure without pulling the whole unit. When the housing is cracked or badly worn, a complete pump may be better; send photos and the code and we will advise.
Does a JIC KPV90 group need the valve plate lapped before it goes in?
No. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC KPV90 group is cut to the code with the right material and surface hardness and to standard interchange tolerances, so it drops into an original housing as it comes. Genuine Komatsu units are stocked too — send the pump code for a fast quote.
Get a quote
Request a quote: Rotary group kit – Komatsu KPV90
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
KomatsuRetainer plate – Komatsu KPV90KPV90On requestView · get a quote
KomatsuValve plate – Komatsu KPV90KPV90On requestView · get a quote
KomatsuPiston – Komatsu KPV90KPV90On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV35HPV35On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV55HPV55On requestView · get a quoteTechnical handbook