Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Friction lining – Kawasaki M2X170

Kawasaki · M2X

Friction lining – Kawasaki M2X170

New, correct codeOn requestM2X170

Quick answer

The Kawasaki M2X170 valve plate is the porting plate that seals against the cylinder block and times each piston's intake and discharge in the swing motor of roughly 30-ton class excavators. Worn, it causes weak, jerky, or drifting swing. Việt Trung Hải supplies JIC plates to the M2X170 code, lapped to spec so they seal on the original block. Fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · M2X
Model code
M2X170
SKU
2021-590-1-120
Condition
New, correct code
Availability
On request

Kawasaki M2X170 valve plate — where it fits

The valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge. On the Kawasaki M2X170 swing motor — which drives slewing on roughly 30-ton class crawler excavators — it keeps rotation smooth, strong, and free of drift when the swing stops.

When to replace it

A scored, pitted, or worn sealing face raises internal leakage. Typical signs: weak or slow swing, jerky rotation, and the upper structure drifting when parked on a slope. Rapid oil heating and metal debris in the oil point the same way.

Choosing quality

A valve plate must stay flat, hard, and finely finished to seal against the block. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies JIC M2X170 plates to the correct code, lapped to the spec so they sit on the original block and bring the clearance back to what the motor had new. Send the code or a photo for a fast quote.

Frequently asked questions

Which machine does the Kawasaki M2X170 valve plate fit?

The M2X170 is a Kawasaki swing motor, typically fitted to crawler excavators around the 30-ton class. The valve plate sits inside this motor and keeps upper-structure rotation smooth and strong. Send the code or machine number and we will confirm the exact part before quoting.

How do I know the swing motor valve plate has failed?

Common symptoms are weak or slow swing, jerky rotation, and the upper structure drifting when parked on a slope. Rapid oil heating and metal debris in the oil also warn that the sealing face is scored or pitted and leaking internally.

Does Việt Trung Hải stock the M2X170 valve plate?

Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies JIC valve plates to the correct M2X170 code, meeting the required material, hardness and surface finish, so the plate seals on the original block without any lapping. Send the part code or a photo for a fast quote.

Get a quote

Request a quote: Friction lining – Kawasaki M2X170

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides