
Washer – Kawasaki M2X170
Quick answer
The Kawasaki M2X170 washer is a spacer/locating ring in the rotary group of the M2X swing motor, fitted to large crawler excavators. It sets the correct axial clearance between rotating parts so the motor stays sealed and slews strongly.
Việt Trung Hải, a JIC Hydraulics distributor, supplies the correct M2X170 part with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X170
- SKU
- 2021-590-1-230
- Condition
- New, correct code
- Availability
- On request
What the M2X170 washer fits
The Kawasaki M2X170 washer is a spacer/locating ring inside the rotary group of the M2X swing (slew) motor. The rotary group is the rotating assembly inside a piston unit — cylinder block, pistons, valve plate, swash plate and shaft — that builds the pressure and torque to slew the upperstructure. The washer sets the correct axial clearance and preload between rotating parts so the valve plate stays sealed. M2X170 is a large-class swing motor fitted to heavy crawler excavators.
When to replace
A worn, scored or deformed washer increases internal play and leakage: weak or jerky slew, drift when stopping, knocking noise, or overheating. Pitting on the mating faces means the rotary group should be rebuilt.
Genuine-quality parts
Việt Trung Hải is an authorized JIC Hydraulics distributor. JIC M2X170 washers and rotary-group sets are made to the same code and interchange tolerance, so they fit the original housing and run true with no reaming or re-shimming. Genuine and JIC stock is held by motor generation — contact us for the right part and a fast quote.
Frequently asked questions
Which motor does the M2X170 washer fit?
It belongs to the rotary group of the Kawasaki M2X170 swing motor, used on large crawler excavators. When replacing it, also check the cylinder block, pistons and valve plate so the rotary group seals properly and slews smoothly.
When should the rotary-group washer be replaced?
When slew is weak, jerky or drifts on stopping, or the motor knocks and overheats. If the washer is worn, scored, pitted or deformed on teardown, replace it — usually with the full rotary group to restore correct clearance.
Does Việt Trung Hải stock the M2X170 washer?
Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải keeps genuine and JIC M2X170 washers on the shelf — correct code, correct material, each one fitting the original rotary group as it is. Contact us for the right part and a fast quote.
Get a quote
Request a quote: Washer – Kawasaki M2X170
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XDrive shaft – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XShoe plate – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XRetainer plate – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XFriction lining – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XValve plate – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XPin – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XBall guide – Kawasaki M2X170M2X170On requestView · get a quoteTechnical handbook