Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Ball guide – Kawasaki M2X170

Kawasaki · M2X

Ball guide – Kawasaki M2X170

New, correct codeOn requestM2X170

Quick answer

The M2X170 ball guide and port plate are rotating-group parts inside the Kawasaki M2X swing motor, holding the piston shoes against the swash plate and distributing oil to the cylinder block, typically on 30-ton class excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC and genuine parts to the correct code with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Kawasaki · M2X
Model code
M2X170
SKU
2021-590-1-208
Condition
New, correct code
Availability
On request

Kawasaki M2X170 ball guide & port plate

The M2X170 ball guide and port plate sit inside the rotating group of the Kawasaki M2X swing motor. The ball guide holds the piston shoes at the correct angle against the swash plate through each rotation, while the port plate distributes oil in and out of the cylinder block. The M2X170 swing motor typically powers the upper-structure swing on 30-ton class excavators.

When to replace

A worn ball guide or loose shoes make the swing jerky, slow or vibrate at start and stop. A scored or pitted port plate leaks internally, drops pressure and runs the motor hot. Both are precision mating parts, so one bad face degrades the whole group.

Choosing quality parts

Việt Trung Hải is an authorized JIC Hydraulics distributor. JIC ball guides and port plates for the M2X170 use load-bearing material, machined and surface-treated to the tolerances the original cylinder block expects — right code, straight in, no lapping. Genuine Kawasaki parts are stocked as well, and we quote fast on the motor code you send.

Frequently asked questions

Which motor does the M2X170 ball guide fit?

It is a part inside the Kawasaki M2X170 swing motor, commonly used on 30-ton class excavators. The ball guide keeps the piston shoes angled correctly against the swash plate, and the port plate routes oil to and from the cylinder block.

When should the ball guide and port plate be replaced?

Replace them when swing becomes jerky, slow or vibrates at start and stop, or when the motor runs hot and weak from internal leakage. A scored or pitted port plate and a worn ball guide signal it is time to inspect and renew the group.

Do JIC M2X170 parts need any work on the cylinder block?

No. JIC machines them to the M2X170 code and to fitting tolerance, so the ball guide and port plate go straight onto the original cylinder block. Việt Trung Hải is an authorized JIC Hydraulics distributor and also has genuine parts; contact us for a fast quote.

Get a quote

Request a quote: Ball guide – Kawasaki M2X170

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides